文章摘要
左俊彦,林有希,孟鑫鑫.难加工材料的高速铣削研究进展[J].精密成形工程,2017,9(4):121-125.
ZUO Jun-yan,LIN You-xi,MENG Xin-xin.Research Progress of HSM in Difficult-Machining-Metal-Material[J].Journal of Netshape Forming Engineering,2017,9(4):121-125.
难加工材料的高速铣削研究进展
Research Progress of HSM in Difficult-Machining-Metal-Material
投稿时间:2017-06-12  修订日期:2017-07-10
DOI:10.3969/j.issn.1674-6457.2017.04.022
中文关键词: 难加工材料  铣削成形  加工摩擦学
英文关键词: difficult-machining-metal-material  milling forming  processing of tribology
基金项目:国家自然科学基金(51375094);清华大学摩擦学国家重点实验室开放基金(SKLTKF13B02);福建省自然科学基金(2015J01195)
作者单位
左俊彦 1.福州大学 机械工程及自动化学院福州 3501162.福建省高端装备制造协同创新中心福州 350116 
林有希 福州大学 机械工程及自动化学院福州 350116 
孟鑫鑫 福州大学 机械工程及自动化学院福州 350116 
摘要点击次数: 3635
全文下载次数: 3654
中文摘要:
      目的 分析难加工材料在高速切削过程中的基本形式及其特点,归纳总结现有的高速切削理论及现象。方法 主要从难加工材料的实验现象和仿真出发,分析高速加工机理,将现有高速铣削方法及其进展进行解析。结果 高速切削在宏观领域的研究主要集中在切屑的形成与刀具磨损,而在微观加工领域,主要研究材料属性及微观结构对于加工的影响。结论 从研究趋势上看,对宏观加工模型和微观理论分析的研究均有进展,但对微观模型的研究逐渐成为了近年来的研究热点。
英文摘要:
      This paper aims to analyze basic forms and characteristics of difficult machining materials in the process of high-speed cutting and summarize existing theories and phenomena of high-speed cutting. Based on experimental phenomenon and simulation of hard working materials, this paper analyzed the mechanism of high-speed machining, the existing high-speed milling method and its progress. The research of the chip formation and tool wear were the research priorities in the macroscopic cutting area, and influences of material properties and microstructure were studied mainly in the field of micro machining. It makes considerable headway in macroscopic processing model and micro-theoretical analysis from the research trend, but the study of micro-model is becoming a hot topic in recent years.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081435位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号