文章摘要
姜智勇,董洪波,周盛武,等.TU1触头托冷精锻工艺及模具设计[J].精密成形工程,2017,9(4):107-111.
JIANG Zhi-yong,DONG Hong-bo,ZHOU Sheng-wu,et al.Precisely Cold Forging Process and Mold Design of Contact Joe TU1[J].Journal of Netshape Forming Engineering,2017,9(4):107-111.
TU1触头托冷精锻工艺及模具设计
Precisely Cold Forging Process and Mold Design of Contact Joe TU1
投稿时间:2017-06-02  修订日期:2017-07-10
DOI:10.3969/j.issn.1674-6457.2017.04.019
中文关键词: TU1  触头托  精密成形  数值模拟  模具设计
英文关键词: TU1  contact joe  precision forming  numerical simulation  die design
基金项目:江西省科学计划(2015BBE50042)
作者单位
姜智勇 南昌航空大学 航空制造工程学院南昌 330063 
董洪波 南昌航空大学 航空制造工程学院南昌 330063 
周盛武 南昌航空大学 航空制造工程学院南昌 330063 
刘伟利 江西欧迪铜业有限公司江西 上饶 334400 
摘要点击次数: 3772
全文下载次数: 3228
中文摘要:
      目的 针对TU1触头托零件工艺中加工效率低、生产成本高、加工后得到的零件表面质量难以达到要求等缺点,提出了一种新的冷精锻成形工艺方案。方法 利用Deform-3D软件对其成形过程进行数值模拟分析,得到变形挤压力及等效应力应变分布规律。结果 利用一次挤压能够完全成形斜边槽及端面台阶,并且在此基础上设计了触头托成形模具,通过实验方法成形出了尺寸精度和表面质量均符合要求的零件。结论 表明了该工艺方案和模具结构设计的可行性和实用性,为触头托零件的批量生产提供了一种更经济有效的方法。
英文摘要:
      The paper aims to propose a new cold forging process scheme to solve shortcomings such as low processing efficiency, high production cost and poor surface quality of the part obtained in the process of TU1 contact joe. The forming process was simulated by Deform-3D software, the deformation force and the equivalent stress and strain distribution rule were obtained. A single extrusion could be able to fully shape the hypotenuse groove and the end step, and on this basis, the forming die of contact joe was designed. Parts of size accuracy and surface quality in line with the requirements were formed through experiment. The process program and die structure design have feasibility and practicability and provide a more economical and effective method for mass production of contact joe.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081773位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号