文章摘要
王小连,王进,周鹏,等.波长对板料锤击式渐进成形性能的影响[J].精密成形工程,2017,9(3):98-101.
WANG Xiao-lian,WANG Jin,ZHOU Peng,et al.Effects of Wavelength on Incremental Pressing Forming of Sheet Metal[J].Journal of Netshape Forming Engineering,2017,9(3):98-101.
波长对板料锤击式渐进成形性能的影响
Effects of Wavelength on Incremental Pressing Forming of Sheet Metal
投稿时间:2017-04-07  修订日期:2017-05-10
DOI:10.3969/j.issn.1674-6457.2017.03.019
中文关键词: 渐进成形  正弦刀路轨迹  波长  表面粗糙度
英文关键词: incremental forming  sinusoidal tool path  wavelength  surface roughness
基金项目:
作者单位
王小连 青岛理工大学 机械工程学院山东 青岛 266520 
王进 青岛理工大学 机械工程学院山东 青岛 266520 
周鹏 青岛理工大学 机械工程学院山东 青岛 266520 
柳琪 青岛理工大学 机械工程学院山东 青岛 266520 
摘要点击次数: 3849
全文下载次数: 3069
中文摘要:
      目的 研究不同波长对板料锤击式渐进成形性能的影响规律。方法 以波长为单一因素,将波长值从0.5~5 mm进行多次重复性实验,分别与普通渐进成形实验结果进行对比。结果 波长对材料的成形性有显著影响,锤击式渐进成形波长值在0.5~5 mm时,板料的成形性能均高于普通渐进成形,随着波长的增加,板料的成形性能降低,成形时间减少。结论 锤击式渐进成形相对于普通渐进成形在成形性能方面具有优越性,综合考虑成形性能、加工时间和表面质量等因素,板料锤击式渐进成形波长为0.5 mm时,成形性能最好。
英文摘要:
      The paper aims to study effects of different wavelength on the incremental forming process of sheet metal. With the wavelength as a single factor, the wavelength tested was repeated from 0.5~5 mm to be compared with experimental results of ordinary incremental forming. The wavelength had significant effects on the formability of material. When the wavelength of the hammer type incremental forming was 0.5~5 mm, the forming performance of sheet metal was higher than ordinary incremental forming; with the increase of the wavelength, the formability was reduced, and the forming time was also reduced. The hammer type compared to ordinary incremental forming has superiority in forming performance of incremental forming. Considering the forming performance, machining time and surface quality, the forming performance is the best when the wavelength of the hammer type incremental forming of sheet metal is 0.5 mm.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081364位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号