王志军,付建华,齐会萍.异形环件多步辗扩模拟[J].精密成形工程,2016,8(6):15-20.
WANG Zhi-jun,FU Jian-hua,QI Hui-ping.Multi-step Simulation of Expanding Exhibition Profiled Ring[J].Journal of Netshape Forming Engineering,2016,8(6):15-20. |
| 异形环件多步辗扩模拟 |
| Multi-step Simulation of Expanding Exhibition Profiled Ring |
| 投稿时间：2016-10-08 修订日期：2016-11-10 |
| DOI：10.3969/j.issn.1674-6457.2016.06.003 |
| 中文关键词: 锻坯 Q345E异形环件 数值模拟 热辗扩 Simufact |
| 英文关键词: forging stock Q345E shaped ring forging simulation hot rolling Simufact |
| 基金项目:国家自然科学基金（51575371）；山西省重点研发计划重点项目（03012015004） |
|
| 摘要点击次数: 3884 |
| 全文下载次数: 3346 |
| 中文摘要: |
| 目的 采用多步辗扩工艺模型虚拟生产异形环件，研究环件多步辗扩过程中环件的成形规律，为实际生产提供工艺参数。方法 利用Gleeble-3500D热模拟实验机对Q345E钢进行单道次热压缩实验，建立环件用钢的流变应力模型，在Simufact中建立大型锻坯外凹槽内台阶环件多步辗扩三维数值稳定辗扩模型，对环件辗扩过程进行数值模拟。结果 在双件辗扩内台阶环件和外凹槽环件的过程中，在与成形辊的接触部位应变场呈现较大值，环件的温度分布从心部到外逐渐降低，环件的应变与温度分布极为不均匀，辗扩过程需要对芯辊分级降速。结论 通过所建立的多步辗扩模型，可以利用矩形锻坯虚拟生产异形环件。 |
| 英文摘要: |
| Production of Special-shaped Rings by Virtual Multi-step Rolling Process Model, Research the Forming Rule of Ring Parts in Multi-step Ring-expanding Process, for the actual production process parameters. Using Gleeble-3500D thermal simulation testing machine had Q345E steel single pass compression test, Established a flow stress model of forging steel, built a large forging stock for the inner ring outer groove step multistep rolling three-dimensional numerical simulation model of the finite element simulation software SIMUFAC, giving a complete numerical simulation; simulation results are shown the strain field exhibits a large value at the contact portion with the forming roll, the temperature distribution of the ring is gradually reduced from the center to the outside, the strain and temperature distribution of the ring are very uneven, rolling process requires the classification of core roll down. Through the establishment of multi-step rolling model can be used for virtual production of rectangular forging billet ring. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号