李奇涵,王红强,刘海静,等.矩形盒拉深变压边力加载规律及预测[J].精密成形工程,2016,8(4):33-37.
LI Qi-han,WANG Hong-qiang,LIU Hai-jing,et al.Loading Law of Variable Blank-holder Force and Its Prediction in Rectangular Box Deep Drawing[J].Journal of Netshape Forming Engineering,2016,8(4):33-37. |
| 矩形盒拉深变压边力加载规律及预测 |
| Loading Law of Variable Blank-holder Force and Its Prediction in Rectangular Box Deep Drawing |
| 投稿时间：2015-12-30 修订日期：2016-07-10 |
| DOI：10.3969/j.issn.1674-6457.2016.04.006 |
| 中文关键词: 矩形盒件 变压边力 拉深成形 神经网络 预测 |
| 英文关键词: rectangular box parts variable blank-holder force (VBHF) drawing forming neural networks prediction |
| 基金项目: |
|
| 摘要点击次数: 3508 |
| 全文下载次数: 3163 |
| 中文摘要: |
| 目的 解决板料拉深过程中出现拉裂、起皱、拉深不充分等缺陷的问题。 方法 利用专业分析板料成形的软件 Dynaform，研究分析了非轴对称件矩形盒，在几种典型的变压边力下的拉深成形性能，获得了成形效果较好的加载模式，进而利用仿真软件 Dynaform 获取了样本数据。 结果 建立了矩形盒拉深成形变压边力网络模型并对其学习训练，最后对神经网络预测结果及仿真结果所得到的变压边力加载曲线进行多项式拟合，获取了最佳压边力控制曲线。 结论 在板料拉深过程中，通过控制压边力的大小，能够较好地发挥材料的流动性，改善制件的最终成形效果。 |
| 英文摘要: |
| In order to eliminate the defects of cracking, wrinkling and inadequate stretching in the stretching process, the tensile forming properties of a rectangular box with a non-axial symmetric rectangular box under the typical variable blank holder force were studied by using the software Dynaform of the professional analysis of sheet metal forming. A more ideal loading mode of forming effect was obtained. Then the sample data was obtained by the simulation software Dynaform. A network model of variable blank holder force in rectangular box drawing forming was established and then studied and trained. Finally, the polynomial fitting of the curve of variable blank holder force was obtained by the neural network prediction results and the simulation results, and the optimal blank holder force control curve was obtained. In the stretching of sheet metal, control on the blank-holder force can better give play to the mobility of materials and improve the final shape effect. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号