文章摘要
李剑,廖丹佩,詹艳然.螺形波纹管旋压成形过程的尺寸变化特点[J].精密成形工程,2016,8(2):55-58.
LI Jian,LIAO Dan-pei,ZHAN Yan-ran.Characteristics of the Dimensional Change during the Spinning Process of Spiral Bellows[J].Journal of Netshape Forming Engineering,2016,8(2):55-58.
螺形波纹管旋压成形过程的尺寸变化特点
Characteristics of the Dimensional Change during the Spinning Process of Spiral Bellows
投稿时间:2015-12-17  修订日期:2016-03-10
DOI:10.3969/j.issn.1674-6457.2016.02.012
中文关键词: 螺形波纹管  旋压  数值模拟  尺寸变化
英文关键词: spiral bellows  spinning  numerical simulation  dimensional change
基金项目:
作者单位
李剑 福州大学 机械工程及自动化学院福州 350108 
廖丹佩 福州大学 机械工程及自动化学院福州 350108 
詹艳然 福州大学 机械工程及自动化学院福州 350108 
摘要点击次数: 3644
全文下载次数: 3478
中文摘要:
      目的 研究波纹管旋压成形过程中的尺寸变化规律。方法 对螺形波纹管旋压成形过程进行了数值模拟和实验研究, 探究了其应变分布规律及各主要尺寸的变化情况。结果 波峰外径、 波距及轴向长度减小, 而波谷外径、 母线长度及波谷处壁厚会相应增加。结论 研究结果可为管坯尺寸选择及制件尺寸的补偿提供依据。
英文摘要:
      The work was aimed to study the dimensional change of spiral bellows during the spinning process. Numerical simulations and experimental study were conducted for the spinning process of spiral bellows to find out the law of strain distribution, and the variations of main dimensions. The crest diameter, wavelength, and the axial length were reduced,while the diameter of the trough,the bus length,and the thickness at the trough were increased accordingly. The research results can provide reference for the dimension selection of tube blank, and the dimensional compensation of the workpieces.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12076643位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号