杨磊,姜开宇,王龙飞.物理可视化技术在聚合物模塑成型分析中的应用[J].精密成形工程,2016,8(1):1-6,36.
YANG Lei,JIANG Kai-yu,WANG Long-fei.Application of Physical Visualization Technology in Polymer Molding Analysis[J].Journal of Netshape Forming Engineering,2016,8(1):1-6,36. |
| 物理可视化技术在聚合物模塑成型分析中的应用 |
| Application of Physical Visualization Technology in Polymer Molding Analysis |
| 投稿时间：2015-09-30 修订日期：2016-01-10 |
| DOI：10.3969/j.issn.1674-6457.2016.01.001 |
| 中文关键词: 注塑成型 可视化 流变特性 成型分析 |
| 英文关键词: injection molding visualization rheological properties molding analysis |
| 基金项目:国家自然科学基金 （51475071） |
|
| 摘要点击次数: 3689 |
| 全文下载次数: 3227 |
| 中文摘要: |
| 为了克服传统注塑成型过程的不可见性， 在模具或者注塑机的料筒上人为添加视窗， 在视窗位置用石英玻璃代替传统的金属材料， 使用摄像机来记录聚合物的填充或塑化过程。主要介绍了物理可视化技术在模塑成型中的应用： 利用高速摄像机拍摄得到熔体的充模过程， 选取一定数量的图片， 根据图片的时间差和流动前沿的位置变化， 可以获得熔体流动前沿的填充形态和填充速度； 利用椰果壳活性炭颗粒作为示踪粒子， 可以得到熔体内部流场的流动轨迹和流动速度等重要参数； 利用物理可视化技术结合模具关键位置的温度压力传感器， 可以直观地解释填充不平衡现象产生的原因和规律。 |
| 英文摘要: |
| In order to study the flow behavior of polymer melt in the cavity of mold and overcome the invisibility of conventional molding process，windows were designed on the mold or the barrel，with quartz glasses inserted in the location of windows，realizing the visualization of injection molding. This paper mainly introduced the applications of physical visualization in molding forming technology： high speed camera was used to capture the filling of the polymer during injection，and then a number of pictures with same time interval were chosen to be used for data handling；the morphology and speed of the melt front were acquired according to the time interval and the changes in the position of melt front. Important parameters，such as flow trajectory，injection speed and so on，could be acquired using active charcoal particle of coconut shell as tracer. Filling imbalance has been a difficult problem for research fellow，but combining with temperature and pressure sensors，physical visualization could be used to explain the reason for this phenomenon and the law. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号