文章摘要
王卫生,李镇康,甘贵生,等.汽车车身 6061 铝合金电阻点焊工艺优化[J].精密成形工程,2015,7(6):76-80.
WANG Wei-sheng,LI Zhen-kang,GAN Gui-sheng,et al.Optimization of Spot Welding for 6061 Al Alloy in Automotive Body[J].Journal of Netshape Forming Engineering,2015,7(6):76-80.
汽车车身 6061 铝合金电阻点焊工艺优化
Optimization of Spot Welding for 6061 Al Alloy in Automotive Body
投稿时间:2015-09-10  修订日期:2015-11-10
DOI:10.3969/j.issn.1674-6457.2015.06.012
中文关键词: 6061 铝合金  正交实验  电阻点焊  优化
英文关键词: 6061 Al alloy  orthogonal experiment  resistance spot welding  optimization
基金项目:重庆市教委/ 科技研究一般项目 (KJ130813)
作者单位
王卫生 重庆平伟科技(集团)有限公司, 重庆 400026 
李镇康 工业和信息化部电子第 5 研究所, 广州 510610 
甘贵生 重庆理工大学 材料科学与工程学院, 重庆 400054 
丁星宇 重庆理工大学 材料科学与工程学院, 重庆 400054 
摘要点击次数: 3606
全文下载次数: 3460
中文摘要:
      目的 优化 6061 铝合金电阻点焊工艺参数。 方法 采用正交实验对 2 mm 厚 6061 铝合金薄板进行对接,并进行了方差分析和性能测试。 结果 当选取方差最优方案,即电流 22 kA、电极压力 0. 15 MPa、焊接时间 15 个周波这组焊接参数时,接头抗拉力为 5. 444 kN,较正交实验最大值提高了25. 5% 。 而选取电流22 kA、电极压力0. 20 MPa、焊接时间11 个周波的焊接参数时,接头抗拉力最大,为 6. 262 kN,较正交实验最大值提高了 44. 35% 。 结论 6061 铝合金最佳焊接参数为:电流 22 kA、电极压力 0. 20 MPa、焊接时间 11 个周波。
英文摘要:
      The aim of this study was to optimize the parameters of spot welding of 6061 Al alloy. Spot welding of 6061 Al alloy of 2 mm thickness were carried out by orthogonal experiment, the analysis of variance and the performance test were conducted. The optimal scheme of variance was the current of 22 kA, the electrode pressure of 0. 15 MPa and the welding time of 15 frequencies. The maximum tensile force of joints under the optimal scheme of variance was 5. 444 kN, increased by 25. 5% compared with the maximum tensile force in the orthogonal experiment. The optimum parameters of spot welding for 6061Al alloy was the current of 22 kA, the electrode pressure of 0. 20 MPa and the welding time of 11 frequencies. Under these parameters, the tensile strength of joints was 6. 262 kN, increased by 44. 35% compared with the maximum tensile force in the orthogonal experiment.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081741位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号