张大伟,赵升吨.螺纹花键同轴零件高效同步滚压成形研究动态[J].精密成形工程,2015,7(2):24-29,40.
ZHANG Da-wei,ZHAO Sheng-dun.Research Status of High Efficiency Forming Shaft Parts Having Thread and Spline Coaxially by Synchronous Rolling[J].Journal of Netshape Forming Engineering,2015,7(2):24-29,40. |
| 螺纹花键同轴零件高效同步滚压成形研究动态 |
| Research Status of High Efficiency Forming Shaft Parts Having Thread and Spline Coaxially by Synchronous Rolling |
| 投稿时间：2015-02-15 修订日期：2015-03-10 |
| DOI：10.3969/j.issn.1674-6457.2015.02.004 |
| 中文关键词: 外螺纹 外花键 同步滚压 轮式模具 运动特征 变形行为 数值模拟 |
| 英文关键词: external thread external spline synchronous rolling round dies motion characteristic deformation behavior numerical simulation |
| 基金项目:国家自然科学基金(51305334);苏州市科技计划项目(SYG201447);西安市科技计划项目(CXY1442(4));西安交通大学“新教师科研支持计划” |
|
| 摘要点击次数: 3765 |
| 全文下载次数: 3646 |
| 中文摘要: |
| 螺纹花键同步滚压在一次滚压成形中可同时成形零件上不同部位的螺纹和花键齿形,克服了先后不同时间分别成形螺纹和花键生产螺纹花键同轴零件的高成本、低效率、成形质量不稳定等缺点。重点介绍了螺纹花键同步滚压成形工艺原理和特点,分别从模具和工件运动特征、滚压塑性变形行为、成形过程建模仿真等方面评述螺纹和花键滚压成形工艺的国内外研究现状,指出了螺纹花键同步滚压成形工艺应用发展所需要解决的关键技术问题。 |
| 英文摘要: |
| The thread and spline on different portions of part can be formed in one rolling process by using thread and spline synchronous rolling. The problems caused by forming thread and spline at different times, such as high cost, low efficiency, and unstable forming quality, can be solved by using thread and spline synchronous rolling. The forming principle and characteristic of thread and spline synchronous rolling were introduced. The state-of-the-art of thread and spline rolling process was summarized from the aspects such as motion characteristic between die and workpiece, plastic deformation behavior, and modeling and simulation of the rolling process. Then, some proposals for further research in thread and spline synchronous rolling process were presented in detail. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号