文章摘要
魏圣泉,郑玉斌,王玉洁,等.置氢α钛几何与能量的第一性原理研究[J].精密成形工程,2015,7(1):27-30.
WEI Sheng-quan,ZHENG Yu-bin,WANG Yu-jie,et al.First-principles Calculation of Geometry Structures and Energies of α-Ti-H System[J].Journal of Netshape Forming Engineering,2015,7(1):27-30.
置氢α钛几何与能量的第一性原理研究
First-principles Calculation of Geometry Structures and Energies of α-Ti-H System
投稿时间:2014-12-20  修订日期:2015-01-10
DOI:10.3969/j.issn.1674-6457.2015.01.005
中文关键词: 密度泛函  第一原理  杂质形成能  置氢
英文关键词: density function theory  the first-principles  impurity formation energy  Hydrogenation
基金项目:国家自然科学基金资助(51205102);中国博士后科学基金资助(2012M511401)
作者单位
魏圣泉 合肥工业大学材料科学与工程学院, 合肥230009 
郑玉斌 合肥工业大学材料科学与工程学院, 合肥230009 
王玉洁 合肥工业大学材料科学与工程学院, 合肥230009 
袁宝国 合肥工业大学材料科学与工程学院, 合肥230009 
摘要点击次数: 3778
全文下载次数: 3294
中文摘要:
      目的 研究不同浓度氢含量对α钛晶体结构与能量的影响。方法 采用基于密度泛函理论(DFT)的第一原理平面波超软赝势方法,得到了不同氢含量的Ti-H 晶体稳定几何结构。结果 置氢后α钛晶胞发生畸变,晶胞体积及体积膨胀率随着氢原子浓度的增加而增大;晶体的基态能量与杂质形成能随着氢含量的升高而降低。结论 晶格畸变为Ti-H 化合物的形成储存了能量;高浓度氢的α钛稳定性得到增强。
英文摘要:
      In order to reveal the effects of different hydrogen contents on crystals and energy of α-Ti. The equilibrium structures of α-Ti-H crystals with different hydrogen contents were calculated using the first-principles method based on plane-wave pseudopotential and density function theory. Hydrogen causes the lattice distortion, the volume and volume expansion rate of α-Ti-H crystals increase with the addition of H atom; The total energies and impurity formation energies decrease with the increasing of H atom. Lattice distortion provides energy for the formation of Ti-H compounds; The stability of α-Ti crystals with high hydrogen contents is enhanced.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12327031位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号