文章摘要
张凯锋,刘泾源.AZ31 镁合金板材自阻加热超塑成形及电流宏微观作用分析[J].精密成形工程,2014,6(6):46-51.
ZHANG Kai-feng,LIU Jing-yuan.Resistance Heating Superplastic Forming of AZ31 Magnesium Alloy and Macro and Microcosmic Function of Current[J].Journal of Netshape Forming Engineering,2014,6(6):46-51.
AZ31 镁合金板材自阻加热超塑成形及电流宏微观作用分析
Resistance Heating Superplastic Forming of AZ31 Magnesium Alloy and Macro and Microcosmic Function of Current
投稿时间:2014-10-10  修订日期:2014-11-10
DOI:10.3969/j.issn.1674-6457.2014.06.006
中文关键词: AZ31 镁合金  自阻加热  超塑成形  电子风力
英文关键词: AZ31 magnesium alloy  resistance heating  superplastic forming  electron wind force
基金项目:国家自然科学基金(51175112)
作者单位
张凯锋 哈尔滨工业大学, 哈尔滨150001 
刘泾源 哈尔滨工业大学, 哈尔滨150001 
摘要点击次数: 3759
全文下载次数: 3390
中文摘要:
      目的 为提高镁合金板材超塑成形加热过程的效率,将自阻加热引入到超塑成形过程中。方法 通过自阻加热实验,分析了电流密度对坯料温度及升温速率的影响;设计了自阻加热胀形装置并确定了工艺参数,实现了AZ31 镁合金的自阻加热超塑胀形。结果 采用该加热方式可将坯料加热时间从数十分钟缩短至几十秒,极大地提高了加热速率,降低了能耗。结论 分析了在电流作用下镁合金的变形机制,发现电流可以通过促进材料的再结晶形核、位错滑移来提高材料塑性,并具有钝化和阻碍空洞扩展的作用。
英文摘要:
      Objective In order to save energy and improve efficiency, the current is adopted in superplastic forming process. Methods Through resistance heating experiments, the influence of current density on temperature of sheet and heating rate is analyzed. By the design of the forming apparatus and determination of the technology parameters, the resistance heating forming is realized. Rsults The results show that, resistance heating can reduce heat-up time from dozens of minutes to dozens of seconds, which greatly improves the heating efficiency and reduces energy consumption. Conclusion The deformation mechanism with the action of current is discussed. It is found that the current can promote recrystallization-nu-cleation and dislocations slipping and hinder the growth and join of cavities, that all improve the plastic property of material.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12407420位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号