符韵,鲁美琪,陈毅挺,等.等径道角 挤压工艺对铸态 AZ91D 镁合金组织的影响[J].精密成形工程,2014,6(5):64-68.
FU Yun,LU Mei-qi,CHEN Yi-ting,et al.Effect of Equal Channel Angular Extrusion Process on the Microstructure of AZ91D Magnesium Alloy[J].Journal of Netshape Forming Engineering,2014,6(5):64-68. |
| 等径道角 挤压工艺对铸态 AZ91D 镁合金组织的影响 |
| Effect of Equal Channel Angular Extrusion Process on the Microstructure of AZ91D Magnesium Alloy |
| 投稿时间：2014-06-16 修订日期：2014-09-01 |
| DOI：10. 3969 /j. issn. 1674-6457. 2014. 05. 011 |
| 中文关键词: 等径道角 挤压 AZ91D 微观组织 工艺参数 |
| 英文关键词: equal channel angular extrusion AZ91D microstructure process parameters |
| 基金项目: |
|
| 摘要点击次数: 4776 |
| 全文下载次数: 3691 |
| 中文摘要: |
| 目 的 介绍等径道角 挤压的 原理及其对铸态 AZ91D 镁合金的 组织产生的 作用 。 方法 通过确定的试验工艺参数, 对 AZ91D 镁合金进行了 等径道角 挤压变形试验。 使用 金相显微镜和扫描电镜( SEM) , 对变形前后的 材料进行了 显微组织的 ?臁?结果 通过进行 ECAE 挤压后, AZ91D镁合金中的黑色共晶相( Mg17Al12) 产生了 回溶, 在机械剪切和动态再结晶 的综合作用 下, 晶 粒得到了 细化。 结论 通过等径道角 挤压, 能明显改善铸态 AZ91D 镁合金的组织。 |
| 英文摘要: |
| Objective To introduce the principle of equal channel angular extrusion( ECAE) and analyze its effect on the microstructure of AZ91D magnesium alloy. Methods The ECAE experiment of AZ91D magnesium alloy was conducted using the designated process parameters. The microstructure of AZ91D magnesium alloy before and after equal channel angular extrusion was investigated by means of optical metalloscopy and scanning electron microscope equipment. Results The results showed that the black eutectic phase ( Mg17Al12) began to remelt after ECAE treatment, and the crystals were refined under the comprehensive effects of mechanical shear and dynamic recrystallization. Conclusion The microstructure of AZ91D magnesium alloy was obviously improved by ECAE. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号