文章摘要
崔长齐,徐洪山,尉少荣,等.铝合金铸锻联合成形工艺毛坯冲制质量控制研究[J].精密成形工程,2014,6(4):79-84.
CUI Chang-qi,XU Hong-shan,WEI Shao-rong,et al.Roughcast Quality Control of the Aluminum Alloy Cast Forge Composite Forming Technology[J].Journal of Netshape Forming Engineering,2014,6(4):79-84.
铝合金铸锻联合成形工艺毛坯冲制质量控制研究
Roughcast Quality Control of the Aluminum Alloy Cast Forge Composite Forming Technology
投稿时间:2014-01-06  修订日期:2014-07-01
DOI:10.3969/j.issn.1674-6457.2014.04.015
中文关键词: 铝合金  冲制毛坯  质量控制
英文关键词: aluminum alloy  roughcast  quality control
基金项目:
作者单位
崔长齐 北方华安工业集团有限公司 技术部, 黑龙江 齐齐哈尔 161006 
徐洪山 北方华安工业集团有限公司 技术部, 黑龙江 齐齐哈尔 161006 
尉少荣 北方华安工业集团有限公司 技术部, 黑龙江 齐齐哈尔 161006 
龚锐 北方华安工业集团有限公司 技术部, 黑龙江 齐齐哈尔 161006 
王秋菊 北方华安工业集团有限公司 技术部, 黑龙江 齐齐哈尔 161006 
林晨华 北方华安工业集团有限公司 技术部, 黑龙江 齐齐哈尔 161006 
摘要点击次数: 4475
全文下载次数: 3487
中文摘要:
      目的 提高铝合金铸锻联合成形工艺毛坯冲制良品率。 方法 采用优化模具设计、设备配置,增加模具保温、坯料预润滑和坯料预处理工序等综合治理方法,开展生产实验研究。 结果 铝合金铸锻联合成形工艺毛坯冲制良品率由原来的不足 85 . 63 % ,提高到了 97 % 的稳定水平。 结论 7 A04 铸铝坯料的冲制成形条件,比 7 A04 挤压棒材的冲制成形条件要求高,用 7 A04 铝合金铸造坯料代替 7 A04 铝合金棒材冲制工件时,必须对毛坯冲制成形工艺进行细致的完善。
英文摘要:
      Objective To increase the roughcast conformity rate of the aluminum alloy cast forge composite forming technology. Methods Comprehensive measures including optimization of mould design, equipment configuration, increasing temperature holding feature of the mould, beforehand lubricating and pretreatment of the blank material were adopted, and production experimental study was conducted. Results Aluminum alloy cast forge composite forming technology increased the roughcast conformity rate from below 85. 63% to stably 97% . Conclusion The cast forming condition of 7A04 cast aluminium material had higher requirements than those of 7A04 extrusion bar material. When 7A04 aluminium alloy casting material was used to replace the 7A04 aluminium alloy bar material for workpiece casting, the casting and forming technology for the semifinished material should be refined.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12075688位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号