姚彭彭,李萍,李成铭,等.基于摩擦修正的 TA15 钛合金热变形行为及加工图[J].精密成形工程,2014,6(4):46-51.
YAO Peng-peng,LI Ping,LI Cheng-ming,et al.Hot Deformation Behavior and Processing Map of TA15 Titanium Alloy Based on Friction Correction[J].Journal of Netshape Forming Engineering,2014,6(4):46-51. |
| 基于摩擦修正的 TA15 钛合金热变形行为及加工图 |
| Hot Deformation Behavior and Processing Map of TA15 Titanium Alloy Based on Friction Correction |
| 投稿时间：2014-04-19 修订日期：2014-07-01 |
| DOI：10.3969/j.issn.1674-6457.2014.04.009 |
| 中文关键词: TA15 钛合金 热变形 摩擦修正 本构方程 加工图 |
| 英文关键词: TA15 titanium alloy hot deformation friction correction constitutive equation processing map |
| 基金项目:国家自然科学基金资助项目(51175137) ;安徽省自然科学基金资助项目(1308085JGD02) |
|
| 摘要点击次数: 5075 |
| 全文下载次数: 3519 |
| 中文摘要: |
| 目的 采用 Gleeble-3500 热模拟实验机,研究 TA15 钛合金在变形温度为 900 ~ 1050 ℃ 、应变速率为 0 . 01 ~ 1 s-1条件下的热压缩流变行为及变形组织。 方法 采用一种简单有效的方法修正了 TA15 钛合金热压缩实验中摩擦引起的误差;计算出了 TA15 钛合金的应力指数和热变形激活能,建立了含有 Z 参数的双曲正弦函数形式本构方程;基于 Murty 准则,建立了其加工图。 结果 TA15 钛合金的热压缩流变行为可采用含有 Z 参数的双曲正弦函数形式本构方程来描述,其平均变形激活能为 625 . 884 kJ / mol;通过分析热加工图,确定了最优热变形工艺参数为:T = 950 ℃ ,ε =0 . 01 s-1。 结论 研究结果可为 TA15 钛合金的塑性变形数值模拟提供基础,对合理制定热加工工艺具有重要指导意义。 |
| 英文摘要: |
| Objective The flow stress behavior and deformation microstructure of hot compressed TA15 titanium alloy were investigated by hot compression tests on Gleeble-3500 thermal simulation machine in the strain rate range of 0. 01 ~ 1 s-1and temperature range of 900 ~ 1050 ℃ . Methods A simple and effective correction method was adopted to reduce the errors caused by friction during the compression process of TA15 titanium alloy. The stress exponent and hot deformation activation energy at elevated temperature were calculated, and the constitutive equation including Z parameter was established on the basis of hyperbolic sine function model. Based on Murty criteria the processing map was obtained. Results The hot deformation behavior of TA15 titanium alloy could be described by a constitutive equation in hyperbolic sine function including Z parameter and the average hot deformation activation energy was 625. 884 kJ / mol. The optimal thermal deformation process parameters were T = 950 ℃ ,ε = 0. 01 s-1by analyzing the processing map. Conclusion The results provided a basis for numerical simulation of plastic deformation and an important guiding significance for the rational development of thermal processing of TA15 titanium alloy. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号