姚毅,孟正华,雷雨.汽车立柱加强板成形分析[J].精密成形工程,2014,6(3):1-5.
YAO Yi,MENG Zheng-hua,LEI Yu.Forming Analysis of a Automotive Pillar Stiffener[J].Journal of Netshape Forming Engineering,2014,6(3):1-5. |
| 汽车立柱加强板成形分析 |
| Forming Analysis of a Automotive Pillar Stiffener |
| 投稿时间：2013-10-14 修订日期：2014-05-01 |
| DOI：10.3969/j.issn.1674-6457.2014.03.001 |
| 中文关键词: 立柱加强板 高强钢 成形工艺分析 |
| 英文关键词: pillar stiffer strength steel forming process analysis |
| 基金项目:国家自然科学基金 (51205298) ; 中央高校基本科研业务费专项资金( WUT: 2013-VII-021) |
|
| 摘要点击次数: 4866 |
| 全文下载次数: 3587 |
| 中文摘要: |
| 目的 轻量化是汽车零部件设计的发展方向,汽车立柱因需要在碰撞中承受外力而变形,并为其他零件提供足够强度和刚度的安装点, 一般都使用高强钢材料制造, 以达到轻量化的要求。方法 对采用 DP590 高强钢制造的典型结构汽车 B 柱加强板进行了工艺分析,以提出高强钢立柱加强板零件的设计及成形工艺优化方案。 通过 AutoForm 软件的板料仿真技术,对采用 590 DP 高强钢的典型汽车 B 柱加强板的冲压工艺进行了数值模拟分析。 结果 成功预测了板料成形过程中可能存在的起皱、开裂等问题。 结论 分析结果为汽车立柱加强板冲压工艺提出了改进方案,实现了模具的设计及优化。 |
| 英文摘要: |
| Objective Lightweight is the future orientation of automobile parts design. Automotive pillar is usually made of high-strength steel material to meet the lightweight requirement because it is subjected to external force and deformation during collision and meanwhile provides the mounting points with sufficient strength and stiffness for other parts. Methods The forming process of a typical automotive B-pillar stiffener made of DP590 was analyzed, in order to propose optimized scheme for designing and forming of high-strength stell pillar stiffener parts. Based on Autoform simulation software, numerical simulation analysis was conducted for the stamping process of a typical automotive B-pillar stiffener made of DP590. Results The possible problems of wrinking and cracking occuring in the forming process were successfully predicted. Conclusion The analysis results suggested improved scheme for the stamping process of automotive pillar stiffener and realized the design and optimization of die. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号