文章摘要
缪伟亮,刘大海,邵雪明.工艺参数对薄壁件多道次旋压变形均匀性的影响[J].精密成形工程,2014,6(2):18-23.
MIAO Wei-liang,LIU Da-hai,SHAO Xue-ming.Effects of Forming Parameters on Deformation Uniformity of Thin-walled Parts during Multi-pass Spinning[J].Journal of Netshape Forming Engineering,2014,6(2):18-23.
工艺参数对薄壁件多道次旋压变形均匀性的影响
Effects of Forming Parameters on Deformation Uniformity of Thin-walled Parts during Multi-pass Spinning
投稿时间:2013-10-14  修订日期:2014-02-16
DOI:10.3969/j.issn.1674-6457.2014.02.004
中文关键词: 铝合金  薄壁件  多道次旋压
英文关键词: aluminum alloy  thin-walled parts  multi-pass spinning
基金项目:
作者单位
缪伟亮 南昌航空大学 航空制造工程学院, 南昌 330063 
刘大海 南昌航空大学 航空制造工程学院, 南昌 330063 
邵雪明 南昌航空大学 航空制造工程学院, 南昌 330063 
摘要点击次数: 4789
全文下载次数: 3609
中文摘要:
      目的 研究成形工艺参数对薄壁件多道次旋压变形均匀性的影响。 方法 采用试验的方法,研究了双轮数控旋压成形铝合金薄壁件过程中,旋压间隙 δ、进给率 f 和旋轮圆角半径 R 等关键工艺参数,对制件表面质量和壁厚均匀性的影响。 结果 3 个工艺参数都对制件表面质量和壁厚均匀性有影响。 结论 减小旋压间隙 δ、采用较大的主轴转速 S 和较小的进给率 f 可提高零件的表面质量和尺寸精度。 改善零件壁厚分布的均匀化程度,适当提高旋轮圆角半径 R,也能使变形的均匀化程度提高。
英文摘要:
      Objective To study the effects of forming parameters on the macro deformation uniformity of the thin-walled aluminum parts during multi-pass spinning process. Methods The influences of spinning gap δ, feed rate f, and spin roller fillet radius R on the quality of the part surface and the uniformity of wall thickness were experimentally investigated in the formation process of thin-walled aluminum parts using double wheeled spinning machine. Results All thress forming parameters had influence on the quality of the part surface and the uniformity of wall thickness. Conclusion The results showed that the surface quality, size precision and thickness uniformity of the parts were improved by decreasing the spinning gap δ, or using a higher spindle speed S with a lower feed rate f . And a bigger spin roller fillet radius also resulted in much more uniform deformation.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081241位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号