文章摘要
韩小后,过小山.一种冲压模具退料机构的设计[J].精密成形工程,2013,5(6):27-29,47.
HAN Xiao-hou,GUO Xiao-shan.A Type of Stamping Die Discharging Mechanism[J].Journal of Netshape Forming Engineering,2013,5(6):27-29,47.
一种冲压模具退料机构的设计
A Type of Stamping Die Discharging Mechanism
投稿时间:2013-08-08  修订日期:2013-10-01
DOI:10.3969/j.issn.1674-6457.2013.06.007
中文关键词: 冲压  吸附  卸料  退料力
英文关键词: stamping  adsorbing  discharging  unloading force
基金项目:
作者单位
韩小后 富士瑞鹄技研( 芜湖) 有限公司, 安徽 芜湖 241009 
过小山 富士瑞鹄技研( 芜湖) 有限公司, 安徽 芜湖 241009 
摘要点击次数: 4074
全文下载次数: 3691
中文摘要:
      针对汽车覆盖件冲压过程中经常出现板料吸附在凹模内的问题,设计了一种冲压模具退料机构。通过现场冲模冲压实践证明,该种退料机构的制造与装配方便,互换性好,且能在提供足够的退料力的同时,减小对模具型面的损伤。
英文摘要:
      Targeting at the problem that the plate is adsorbed in upper die which often occurs during the automobile panel stamping process, a type of stamping die discharging mechanism is designed. Through practice of punching and stamping on site, it has proved that this type of discharging device has the advantages of simple structure, convenient manufacture and assembly, good interchangeability, and providing enough unloading force while reducing harm to the die-face.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12076111位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号