赵广军,李春文,张立岩,等.某薄壁壳体收带工艺改进[J].精密成形工程,2013,5(5):57-60.
ZHAO Guang-jun,LI Chun-wen,ZHANG Li-yan,et al.Tightening Band Process Improvement of a Thin-walled Shell[J].Journal of Netshape Forming Engineering,2013,5(5):57-60. |
| 某薄壁壳体收带工艺改进 |
| Tightening Band Process Improvement of a Thin-walled Shell |
| 投稿时间：2013-06-03 修订日期：2013-08-01 |
| DOI：10.3969/j.issn.1674-6457.2013.05.014 |
| 中文关键词: 薄壁壳体 收带 夹爪 芯子 |
| 英文关键词: thin-walled shell tightening band clamping jaw core |
| 基金项目: |
|
| 摘要点击次数: 4323 |
| 全文下载次数: 3429 |
| 中文摘要: |
| 分析了弹体收带工艺产生的变形问题,理论计算弹带收带所需挤压力,确定收带弹体变形产生的原因,通过改进收带工艺和夹爪结构、优化调整收带芯子与弹体内膛配合间隙,减少了薄壁弹体收带变形,降低了收带废品率,保证了薄壁弹体收带质量,节约了生产成本。 |
| 英文摘要: |
| The deformation problem in tightening band process of projectile shell is analyzed. Theoretical calculation of the extrusion load of tightening band process of projectile shell is conducted. The cause of deformation problem is determined. By improving tightening band process and clamping jaw structure and optimizing the fit clearance of between core of tightening band and shell bore the deformation of in tightening band of the thin-walled shell is reduced. The rejection rate is decreased. The quality is ensured. The production cost is saved. The experience of tightening band of the thin-walled shell is obtained. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号