文章摘要
李中麟,夏克祥,姜春茂,等.某子母弹弹体毛坯加工工艺改进[J].精密成形工程,2013,5(5):49-52.
LI Zhong-lin,XIA Ke-xiang,JIANG Chun-mao,et al.Technology Improvement of a Shrapnel Shell Blank[J].Journal of Netshape Forming Engineering,2013,5(5):49-52.
某子母弹弹体毛坯加工工艺改进
Technology Improvement of a Shrapnel Shell Blank
投稿时间:2013-04-07  修订日期:2013-08-01
DOI:10.3969/j.issn.1674-6457.2013.05.012
中文关键词: 子母弹弹体  钢管收口  拉伸
英文关键词: shrapnel projectile shell  necking of steel tube  drawing
基金项目:
作者单位
李中麟 北方华安工业集团公司, 黑龙江 齐齐哈尔 161046 
夏克祥 北方华安工业集团公司, 黑龙江 齐齐哈尔 161046 
姜春茂 北方华安工业集团公司, 黑龙江 齐齐哈尔 161046 
刘有江 北方华安工业集团公司, 黑龙江 齐齐哈尔 161046 
朱晓英 北方华安工业集团公司, 黑龙江 齐齐哈尔 161046 
赵裕民 北方华安工业集团公司, 黑龙江 齐齐哈尔 161046 
王波 北方华安工业集团公司, 黑龙江 齐齐哈尔 161046 
王威威 北方华安工业集团公司, 黑龙江 齐齐哈尔 161046 
单利剑 北方华安工业集团公司, 黑龙江 齐齐哈尔 161046 
摘要点击次数: 4300
全文下载次数: 3603
中文摘要:
      为了提高弹体毛坯的材料利用率和降低生产成本,开展了钢管一次收口工艺改进。 根据钢管收口过程的变形规律,改进已有工装、模具,最终实现了弹体毛坯由钢管一次收口成形。 该工艺的难点是控制收口的形状,以及收口过程中模具润滑材料的选择。 工艺改进后,简化了工序,减少了工模具及刀具的消耗,改善了工作环境,降低了操作工人的劳动强度,极大地提高了材料利用率,产品质量稳定,符合制造与验收规范要求。
英文摘要:
      In order to improve the material utilization of projectile blank and reduce the production cost, a one-pass necking process improvement was carried out by steel tube. According to the deformation rule of steel tube necking process one-pass necking process of projectile blank by steel tube was realized by improving the existing tooling, mold. The process difficulty is control of the necking shape and the mould lubrication material choice in necking process. After process improvement, the process is simplified, the consumption of the die and cutting tool is reduced, working environment is improved, the labor intensity of operators is decreased, material utilization is greatly improved, product quality is stable and the demands of manufacturing and acceptance specification can be met.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12082644位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号