文章摘要
黄智健,韩清华,王海英,等.一种手动盘旋管成形装置的研制[J].精密成形工程,2013,5(5):44-48.
HUANG Zhi-jian,HAN Qing-hua,WANG Hai-ying,et al.Development of a Manual Spiral Tube Bending Device[J].Journal of Netshape Forming Engineering,2013,5(5):44-48.
一种手动盘旋管成形装置的研制
Development of a Manual Spiral Tube Bending Device
投稿时间:2013-06-18  修订日期:2013-08-01
DOI:10.3969/j.issn.1674-6457.2013.05.011
中文关键词: 手动  盘旋管  螺旋槽  滚轮  成形装置
英文关键词: manual  spiral tube  spiral grooves  wheel  bending device
基金项目:
作者单位
黄智健 西安飞豹机电有限公司, 西安 710089 
韩清华 中航工业第一飞机设计研究院, 西安 710089 
王海英 中航工业第一飞机设计研究院, 西安 710089 
曹德旺 西安飞豹机电有限公司, 西安 710089 
姜丰收 西安飞豹机电有限公司, 西安 710089 
摘要点击次数: 3981
全文下载次数: 3378
中文摘要:
      针对盘旋管加工成形问题而设计的一种成形装置,该装置采用螺旋槽、靠模杆、滚轮、手柄施压等方式,通过更换螺旋杆、滚轮等部件,可以在成形装置上完成小管径导管加工不同直径的盘旋管,有效解决不同管径导管成形不同直径盘旋管的加工问题。 这种成形装置结构简单,制造方便,适应性强,工作效率高,加工盘旋管的成本低。
英文摘要:
      For the problem of disk tube shaping, a forming device is designed using the method of putting pressure to the tube by the spiral grooves, closing mold lever, wheel, handle and so on. Through the replacements of the helical rod and wheel parts, thin tube can be processed to the spiral tube of different diameters using this device. This method can solve the problem of processing the different diameter tube to the different diameter spiral tube. This device is simple in structure, convenient in manufacture, good in adaptation, high in efficiency and low in cost.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081438位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号