文章摘要
董飞,华睿,钱陈豪,等.ECAPT 过程中 TE 工艺对 ECAP 变形规律的影响[J].精密成形工程,2013,5(5):9-12.
DONG Fei,HUA Rui,QIAN Chen-hao,et al.Effects of Subsequent TE Process on the Material Deformed by ECAP during ECAPT Process[J].Journal of Netshape Forming Engineering,2013,5(5):9-12.
ECAPT 过程中 TE 工艺对 ECAP 变形规律的影响
Effects of Subsequent TE Process on the Material Deformed by ECAP during ECAPT Process
投稿时间:2013-04-24  修订日期:2013-08-01
DOI:10.3969/j.issn.1674-6457.2013.05.003
中文关键词: 等径角挤扭( ECAPT)  数值模拟  应变累积
英文关键词: equal channel angular pressing and torsion  numerical simulation  accumulation of strain
基金项目:
作者单位
董飞 合肥工业大学 材料科学与工程学院, 合肥 230009 
华睿 合肥工业大学 材料科学与工程学院, 合肥 230009 
钱陈豪 合肥工业大学 材料科学与工程学院, 合肥 230009 
李萍 合肥工业大学 材料科学与工程学院, 合肥 230009 
摘要点击次数: 4407
全文下载次数: 3388
中文摘要:
      通过对纯铝等径角挤压( ECAP) 和等径角挤扭( ECAPT) 变形行为的数值模拟,获得了材料在不同工艺下的应变和损伤情况。 结果表明,在 ECAPT 工艺中试样通过 ECAP 通道后能获得比单独的 ECAP 更高的应变累积,应变累积量随 TE 通道螺旋角 茁 的增大而增大,同时试样内部的应变分布也得到改善,试样在受到 TE 工艺的背压后材料表面受到剪切破坏的可能性也明显降低。
英文摘要:
      The distributions of the strain and damage of blank were obtained by the numerical simulation of equal channel angular pressing ( ECAP) and equal channel angular pressing & torsion ( ECAPT) with aluminum 1100. Results indicate that the blank through the ECAP channel in ECAPT accumulates more strains than those of the simple ECAP, and the value of the effective strain will increase with the helical angle 茁 of TE channel increasing. What's more, the distribution of the strain of the part is more homogenous, and the possibility of the damage decreases obviously when the part is forced by the back pressure of TE.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12072051位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号