文章摘要
曹明明,程玲舒,黄文超,等.免清洗钎剂的助焊能力及其限度[J].精密成形工程,2013,5(5):5-8,17.
CAO Ming-ming,CHENG Ling-shu,HUANG Wen-chao,et al.Weldability and Limits of No-clean Flux[J].Journal of Netshape Forming Engineering,2013,5(5):5-8,17.
免清洗钎剂的助焊能力及其限度
Weldability and Limits of No-clean Flux
投稿时间:2013-05-09  修订日期:2013-08-01
DOI:10.3969/j.issn.1674-6457.2013.05.002
中文关键词: 免清洗  钎剂  助焊性  限度
英文关键词: no-clean  flux  weldability  limit
基金项目:
作者单位
曹明明 重庆理工大学 材料科学与工程学院, 重庆 400054 
程玲舒 西南技术工程研究所, 重庆 400039 
黄文超 宜宾市南溪区经济和信息化局, 四川 宜宾 644100 
唐明 重庆理工大学 材料科学与工程学院, 重庆 400054 
罗虎 重庆理工大学 材料科学与工程学院, 重庆 400054 
王青萌 重庆理工大学 材料科学与工程学院, 重庆 400054 
摘要点击次数: 4117
全文下载次数: 3318
中文摘要:
      讨论了免清洗钎剂的特性和作用机理,应用物理化学原理对其活性的决定因素、助焊能力及其限度进行了分析。 结果表明,钎剂的助焊能力主要取决于其选用的活性剂,而免清洗钎剂主要采取复配活性剂的方式提高其活性。 尽管钎焊时高活性钎剂能显著提升 σs-f,降低 σl-f,但却无法使 σs-l 有效下降,这是钎剂活性难以完全发挥作用的根本原因,因此钎剂的活性是有限度的。
英文摘要:
      The characteristics and function mechanism of no-clean flux were discussed, determinants of activity, fluxing capacity and limit were analysed by principles of physical chemistry. The results show that weldability of no-clean flux mainly depends on the chosen active agents, and no-clean flux mainly adopts the combined surfactant to increase its activity. Although the high activity of flux can significantly improve σs-f, reduce σ1-f, but can not make σs-1effectively descent. This is the fundamental reason why the flux activity is difficult to thoroughly play,so the flux activity is limited.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12072371位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号