文章摘要
彭秀兰,王宏伟,王登科,等.薄壁深锥形零件整形过渡毛坯的设计[J].精密成形工程,2013,5(4):54-56.
PENG Xiu-lan,WANG Hong-wei,WANG Deng-ke,et al.Transitional Reshape Blank Design of Thin-walled Deep Tapered Parts[J].Journal of Netshape Forming Engineering,2013,5(4):54-56.
薄壁深锥形零件整形过渡毛坯的设计
Transitional Reshape Blank Design of Thin-walled Deep Tapered Parts
投稿时间:2013-04-16  修订日期:2013-06-01
DOI:10.3969/j.issn.1674-6457.2013.04.014
中文关键词: 薄壁深锥形零件  整形过渡毛坯  整形变形量
英文关键词: thin-walled deep tapered part  transitional reshape blank  reshaping extent
基金项目:
作者单位
彭秀兰 包头职业技术学院, 内蒙古 包头 014030 
王宏伟 北方华安工业集团公司, 黑龙江 齐齐哈尔 161046 
王登科 山东红旗机电集团有限公司, 山东 潍坊 261031 
聂兰启 山东红旗机电集团有限公司, 山东 潍坊 261031 
摘要点击次数: 4123
全文下载次数: 3495
中文摘要:
      通过对薄壁深锥形零件进行整形,介绍了整形加工的特点,提出了整形过渡毛坯变形量的确定方法,并介绍了薄壁深锥形零件整形模的结构及特点。
英文摘要:
      Reshaping characteristics are introduced by reshaping of thin-walled deep tapered parts. The deformation extent of the transitional reshape blank is introduced and the structure and characteristics of the reshaping die for the thin-walled deep tapered parts are given.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12080994位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号