文章摘要
蒙以嫦.冲裁模凸、凹模零件的优化设计[J].精密成形工程,2013,5(4):51-53,63.
MENG Yi-chang.Optimization Design of Convex and Concave Mold Parts for Blanking Die[J].Journal of Netshape Forming Engineering,2013,5(4):51-53,63.
冲裁模凸、凹模零件的优化设计
Optimization Design of Convex and Concave Mold Parts for Blanking Die
投稿时间:2013-03-31  修订日期:2013-06-01
DOI:10.3969/j.issn.1674-6457.2013.04.013
中文关键词: 凸、凹模设计  刃口尺寸  外形尺寸  材料选用
英文关键词: convex and concave mold design  cutting edge size  outline dimensions  material selection
基金项目:
作者单位
蒙以嫦 柳州职业技术学院, 广西 柳州 545006 
摘要点击次数: 3911
全文下载次数: 3696
中文摘要:
      分析了冲裁模凸、凹模零件传统设计存在的问题,以现代企业实际需求为出发点,引入汽车企业的钢板模设计标准,从冲裁刃口尺寸计算、外形尺寸设计、材料选用等方面陈述了优化设计的思路,对加快模具开发周期,降低模具制造成本,起到十分重要的作用。
英文摘要:
      The problems of traditional design of convex and concave mold parts for blanking die are analyzed. As a starting point by the actual needs of the modern enterprise, the steel mold design standards of the auto companies are introduced. The ideas of optimizatin design are stated from the calculation of blanking cutting edge size, outline dimensions design and material selection, which plays an important role for accelerating mold development cycle and reducing the cost of mold manufacturing.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081690位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号