刘胜杰,张彦敏.T 型管轴压胀形的加载轨迹优化研究[J].精密成形工程,2013,5(4):27-30,34.
LIU Sheng-jie,ZHANG Yan-min.Loading Trajectory Optimization of Axial Feeding Bulging for T-tube[J].Journal of Netshape Forming Engineering,2013,5(4):27-30,34. |
| T 型管轴压胀形的加载轨迹优化研究 |
| Loading Trajectory Optimization of Axial Feeding Bulging for T-tube |
| 投稿时间：2013-03-28 修订日期：2013-06-01 |
| DOI：10.3969/j.issn.1674-6457.2013.04.007 |
| 中文关键词: 三通管 轴压胀形 加载轨迹 集成优化 |
| 英文关键词: T-tube axial feeding bulging process loading trajectory integrative optimization |
| 基金项目: |
|
| 摘要点击次数: 3964 |
| 全文下载次数: 3369 |
| 中文摘要: |
| 利用有限元软件和优化软件建立了 T 型管轴压胀形的加载轨迹优化集成,完成了 T 型管轴压胀形成形的加载轨迹优化。 优化结果表明,利用集成优化后的加载轨迹获得的管成形件质量更好,即获取的成形件的支管高度更能满足要求,壁厚分布更均匀。 |
| 英文摘要: |
| The loading trajectory optimization integration of T-tube axial feeding bulging was designed by means of the interface of data transmission between the finite element simulation and the algorithm of optimization. The trajectory optimization of axial feeding bulging was finished. The results indicated that the forming quality of tube after loading trajectory optimization was better. The optimized branch height was higher and the thickness distribution for T-tube was more even. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号