柯尊芒,鹿新建,冯华伟,等.双曲柄多连杆压力机滑块运动曲线研究[J].精密成形工程,2013,5(4):16-19.
KE Zun-mang,LU Xin-jian,FENG Hua-wei,et al.Research on Slider Motion Curves of Double Crank Press[J].Journal of Netshape Forming Engineering,2013,5(4):16-19. |
| 双曲柄多连杆压力机滑块运动曲线研究 |
| Research on Slider Motion Curves of Double Crank Press |
| 投稿时间：2013-05-10 修订日期：2013-06-01 |
| DOI：10.3969/j.issn.1674-6457.2013.04.004 |
| 中文关键词: 双曲柄机构 滑块位移曲线 滑块速度曲线 |
| 英文关键词: double-crank mechanism displacement curve slider velocity curve |
| 基金项目: |
|
| 摘要点击次数: 4352 |
| 全文下载次数: 3679 |
| 中文摘要: |
| 采用杆组法,获取了双曲柄多连杆机构各铰接点处的位移方程,在 ADAMS 中建立了参数化仿真模型,研究了连杆长度、连杆夹角及偏心距改变时滑块位移、速度曲线的变化规律,有助于双曲柄多连杆压力机的研发。 |
| 英文摘要: |
| The displacement equations of the hinge point of the double-crank mechanism were obtained based on bar-groups. The parameterized simulation model was built in ADAMS. The variation of the displacement curves and velocity curves was studied when the links length,angle and eccentricity changed. And this helps the development of the double crank press. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501719号