文章摘要
夏祥生,张帷,王长朋,等.稀土镁合金热压缩流变应力修正及热变形行为[J].精密成形工程,2013,5(4):1-6.
XIA Xiang-sheng,ZHANG Wei,WANG Chang-peng,et al.Correction of Hot Compression Flow Stress and Hot Deformation Behavior of Rare Earth Magnesium Alloy[J].Journal of Netshape Forming Engineering,2013,5(4):1-6.
稀土镁合金热压缩流变应力修正及热变形行为
Correction of Hot Compression Flow Stress and Hot Deformation Behavior of Rare Earth Magnesium Alloy
投稿时间:2012-03-12  修订日期:2013-06-01
DOI:10.3969/j.issn.1674-6457.2013.04.001
中文关键词: 稀土镁合金  热变形行为  变形激活能  微观组织
英文关键词: rare earth magnesium alloy  hot deformation behavior  deformation activation energy  microstructure
基金项目:
作者单位
夏祥生 西南技术工程研究所, 重庆 400039
国防科技工业精密塑性成形技术研究应用中心, 重庆 400039 
张帷 西南技术工程研究所, 重庆 400039 
王长朋 西南技术工程研究所, 重庆 400039 
李迪凡 西南技术工程研究所, 重庆 400039 
王艳艳 西南技术工程研究所, 重庆 400039 
舒大禹 西南技术工程研究所, 重庆 400039
国防科技工业精密塑性成形技术研究应用中心, 重庆 400039 
万元元 西南技术工程研究所, 重庆 400039
国防科技工业精密塑性成形技术研究应用中心, 重庆 400039 
黄志伟 西南技术工程研究所, 重庆 400039
国防科技工业精密塑性成形技术研究应用中心, 重庆 400039 
摘要点击次数: 4083
全文下载次数: 3698
中文摘要:
      在 Gleeble-1500 D 热模拟机上采用等温压缩实验研究了 Mg-7 Gd-5 Y-1 Nd-0 . 5 Zr 合金的高温压缩变形行为,获得合金在温度为 350 ~ 530 ℃ 、应变速率为 0 . 005 ~ 5 s-1条件下的流变应力曲线。 对流变应力曲线进行了摩擦和变形热修正。 通过摩擦与温升修正后的应力值,计算出了平均热激活能和应力指数,Q =262 . 608 kJ / mol,n = 3 . 745 ,分析得出了变形激活能随温度的变化规律。 结合显微组织演变,合金的热锻初始温度应在 500 ~ 530 ℃ 为宜。
英文摘要:
      The hot deformation behaviors of Mg-7Gd-5Y-1Nd-0. 5Zr alloy were investigated by hot compression tests with Gleeble1500D thermal simulator. The flow stress curves in the temperature range of 350 ~ 530 ℃ and strain rate of 0. 005 ~ 5 s-1 were obtained. The flow stress curves were corrected in consideration of the friction and deformation. Deformation activation energy and stress exponent were calculated based on the corrected flow stress, which were 262. 608 kJ / mol and 3. 745, respectively, and the variation of deformation activation energy with temperature was discussed. The initial temperature range for hot-forging of the alloy was suggested to be 500 ~ 530 ℃ .
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12238575位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号