文章摘要
王宏伟,肖峰,贾金伟,等.低矮工件落料拉深挤切边复合模具[J].精密成形工程,2013,5(1):62-66.
WANG Hong-wei,XIAO Feng,JIA Jin-wei,et al.Blanking Drawing Extrusion Trimming Compound Die for Low Workpiece[J].Journal of Netshape Forming Engineering,2013,5(1):62-66.
低矮工件落料拉深挤切边复合模具
Blanking Drawing Extrusion Trimming Compound Die for Low Workpiece
投稿时间:2012-04-24  修订日期:2012-12-01
DOI:10.3969/j.issn.1674-6457.2013.01.016
中文关键词: 低矮工件  挤切边原理  设计要点  冲模实例
英文关键词: low workpiece  extrusion trimming principle  design  mold examples
基金项目:
作者单位
王宏伟 北方特种能源集团 西安庆华公司, 西安 710025 
肖峰 北方特种能源集团 西安庆华公司, 西安 710025 
贾金伟 北方特种能源集团 西安庆华公司, 西安 710025 
张金 北方特种能源集团 西安庆华公司, 西安 710025 
王飞桥 北方特种能源集团 西安庆华公司, 西安 710025 
摘要点击次数: 4256
全文下载次数: 3591
中文摘要:
      设计了一种新的复合模具— — —落料拉深挤切边复合模,该模具在一个冲压行程中,能够完成对低矮类型工件的落料、拉深和挤切边工艺过程,可以有效地控制工件的内、外径和高度尺寸。 重点介绍了模具的工作原理和设计要点,并附模具实例说明。
英文摘要:
      Blanking drawing extrusion trimming compound die is a new composite mold form. The drawing and extrusion trimming process can be completed in a press stroke for the low workpiece. The inside of the workpiece, diameter and height dimensions can be ffectively controlled. This paper introduces work principle of the mold and the design main points, and gives mold examples.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081298位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号