文章摘要
秦会常,贾波,王传政,等.某药模底座失效分析[J].精密成形工程,2013,5(1):54-57,70.
QIN Hui-chang,JIA Bo,WANG Chuan-zheng,et al.Failure Analysis of Punch for Pressing Powder Block[J].Journal of Netshape Forming Engineering,2013,5(1):54-57,70.
某药模底座失效分析
Failure Analysis of Punch for Pressing Powder Block
投稿时间:2012-05-27  修订日期:2012-12-01
DOI:10.3969/j.issn.1674-6457.2013.01.014
中文关键词: 淬火马氏体  配合间隙  应力集中
英文关键词: quenching martensite  fit clearance  stress concentration
基金项目:
作者单位
秦会常 中国兵器工业集团 山东特种集团有限公司, 山东 淄博 255201 
贾波 中国兵器工业集团 山东特种集团有限公司, 山东 淄博 255201 
王传政 中国兵器工业集团 山东特种集团有限公司, 山东 淄博 255201 
赵兴俭 中国兵器工业集团 山东特种集团有限公司, 山东 淄博 255201 
李宗江 中国兵器工业集团 山东特种集团有限公司, 山东 淄博 255201 
张丛博 中国兵器工业集团 山东特种集团有限公司, 山东 淄博 255201 
杨志传 中国兵器工业集团 山东特种集团有限公司, 山东 淄博 255201 
摘要点击次数: 4038
全文下载次数: 3473
中文摘要:
      通过对 2 号药模底座的化学成分分析、断口宏微观形貌观察、金相组织检测、硬度检测及药模底与压药冲子的配合间隙检查,得出药模底座断裂的性质为脆性断裂;药模底座 R 角交接处粗大的加工刀痕,R 角过渡不圆滑是药模底座断裂的主要原因;磨削不当产生了二次淬火马氏体,使得药模底座底部的组织脆性增加、应力增强,是药模底座断裂的重要原因;材质不良对药模底座的断裂也有重要影响;压药冲子与药模底座之间的配合间隙过小,导致压药冲子与药模底座间产生较大应力集中,也是药模底座断裂不可忽视的因素。
英文摘要:
      A conclusion was drawn that the fracture of No. 2 punch for pressing powder block was a low-circle high stress fatigue one after the chemical analysis,macro and micro observation of the fracture surface, metallographic structure inspection,hardness testing as well as the fit clearance inspection between the mold and the punch. Another reason for the fracture was the rough machining on rounding of the punch. Besides,the fit clearance between the punch and the mold was so small that the stress concentration produced by it was too big to bear for the punch.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081456位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号