文章摘要
姜焕成,王宏伟,李和美,等.Mn57-2-2-0 . 5 锰黄铜铸造裂纹成因分析及对策[J].精密成形工程,2013,5(1):51-53.
JIANG Huan-cheng,WANG Hong-wei,LI He-mei,et al.Mn57-2-2-0 . 5 Manganese Brass Casting Crack Analysis and Measures[J].Journal of Netshape Forming Engineering,2013,5(1):51-53.
Mn57-2-2-0 . 5 锰黄铜铸造裂纹成因分析及对策
Mn57-2-2-0 . 5 Manganese Brass Casting Crack Analysis and Measures
投稿时间:2012-05-29  修订日期:2012-12-01
DOI:10.3969/j.issn.1674-6457.2013.01.013
中文关键词: 锰黄铜  裂纹  半连续铸造  缺陷
英文关键词: manganese brass  crack  semi-continuous casting  defect
基金项目:
作者单位
姜焕成 黑龙江北方华安工业集团有限公司, 黑龙江 齐齐哈尔 161046 
王宏伟 黑龙江北方华安工业集团有限公司, 黑龙江 齐齐哈尔 161046 
李和美 黑龙江北方华安工业集团有限公司, 黑龙江 齐齐哈尔 161046 
来盛骞 黑龙江北方华安工业集团有限公司, 黑龙江 齐齐哈尔 161046 
摘要点击次数: 4069
全文下载次数: 3735
中文摘要:
      以 Mn57-2-2-0 . 5 锰黄铜半连续铸造生产实践为例,分析了试制过程中产生裂纹的原因,通过结晶器结构优化、冷却水强度分配及浇注速度调整等措施,解决了该类缺陷。 此工艺措施对同类合金的同类缺陷非常有效,同时对探索复杂黄铜半连续铸造生产有一定借鉴意义。
英文摘要:
      By Mn57-2-2-0. 5 Manganese brass semi-continuous casting producting practice as example, the crack reason during trial manufacture is analyzed. Through measures of the crystallizer structure optimization, cooling water intensity distribution and casting speed adjustment this defect is solved. The measures are very effective for similar alloys and similar defects, and have a certain significance for exploring the complex brass semi-continuous casting production.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12082422位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号