文章摘要
张志强,苏振军,李宏杰,等.弯辊力对带材板凸度影响的实验研究[J].精密成形工程,2013,5(1):1-3,11.
ZHANG Zhi-qiang,SU Zhen-jun,LI Hong-jie,et al.Experimental Study on the Effect of Bending Force on Crown of the Strip[J].Journal of Netshape Forming Engineering,2013,5(1):1-3,11.
弯辊力对带材板凸度影响的实验研究
Experimental Study on the Effect of Bending Force on Crown of the Strip
投稿时间:2012-05-20  修订日期:2012-12-01
DOI:10.3969/j.issn.1674-6457.2013.01.001
中文关键词: 带材  板凸度  弯辊力
英文关键词: strip  crown  bending force
基金项目:国家自然科学基金资助项目(51105264,51104104)
作者单位
张志强 邯郸钢铁集团有限责任公司, 河北 邯郸 056015
太原科技大学 山西省冶金设备设计理论及技术重点实验室, 太原 030024 
苏振军 邯郸钢铁集团有限责任公司, 河北 邯郸 056015 
李宏杰 太原科技大学 山西省冶金设备设计理论及技术重点实验室, 太原 030024 
弓习峰 邯郸钢铁集团有限责任公司, 河北 邯郸 056015 
黄庆学 太原科技大学 山西省冶金设备设计理论及技术重点实验室, 太原 030024 
潘露 太原科技大学 山西省冶金设备设计理论及技术重点实验室, 太原 030024 
摘要点击次数: 4292
全文下载次数: 3763
中文摘要:
      采用实验的方法,通过改变弯辊力的大小,把实验工况分为 7 种,研究分析了在同一轧制条件下,不同弯辊力对带钢板凸度的影响。 对实验数据进行了分析,得出了比较理想的弯辊力,对以后的生产实践具有一定的指导意义。
英文摘要:
      Experimental methods were divided into seven experimental conditions by changing the size of the bending force. In the same rolling conditions the influence for the bending force on the crown of the strip was researched and analyzed. And by analyzing the experimental data, the ideal value of the bending force was obtained, which provides guidance for the future production practice.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12072880位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号