文章摘要
杨继璋,孙建军,王薇,等.高轮毂齿轮毛坯的模锻成形工艺及模具设计[J].精密成形工程,2012,4(3):67-69,74.
YANG Ji-zhang,SUN Jian-jun,WANG Wei,et al.Die Forging Technology and Mold Design of High Hub Gear Blank[J].Journal of Netshape Forming Engineering,2012,4(3):67-69,74.
高轮毂齿轮毛坯的模锻成形工艺及模具设计
Die Forging Technology and Mold Design of High Hub Gear Blank
投稿时间:2011-12-28  修订日期:2012-05-10
DOI:
中文关键词: 薄壁深孔类锻件  镦粗  预锻  终锻
英文关键词: thin-wall and deep-bore forging piece  upsetting  pre-forging  finish forging
基金项目:
作者单位
杨继璋 山西利民工业有限责任公司 山西 太谷 030812 
孙建军 总装备部南京军代局驻济南地区代表室 济南 250021 
王薇 山西利民工业有限责任公司 山西 太谷 030812 
令淑萍 山西利民工业有限责任公司 山西 太谷 030812 
摘要点击次数: 3741
全文下载次数: 2985
中文摘要:
      通过对高轮轮毂齿轮的结构进行分析,制定出该锻件锻造成形的工艺流程,阐述了模锻工步、型腔的设计及模锻操作方法,实现了在3 150 t热模锻压力机上锻造生产。
英文摘要:
      According to the analysis about high hub gear structure, die forging process flow for this forging piece is introduced, as well as the die forging work step, cavity design and die forging operation method. And eventually the forging production could be realized in the 3 150 T hot die forging press.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12409931位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号