文章摘要
徐珂,李萍,张超,等.双相钢冲压成形应变路径影响规律研究[J].精密成形工程,2012,4(3):60-63.
XU Ke,LI Ping,ZHANG Chao,et al.Study on Parameters' Effect on Strain Paths of Stamping Forming Process of Dual-phase Sheet Steel[J].Journal of Netshape Forming Engineering,2012,4(3):60-63.
双相钢冲压成形应变路径影响规律研究
Study on Parameters' Effect on Strain Paths of Stamping Forming Process of Dual-phase Sheet Steel
投稿时间:2011-05-10  修订日期:2012-05-10
DOI:
中文关键词: DP高强钢板  冲压成形  应变路径  正交试验
英文关键词: dual-phase sheet steel  stamping  strain path  orthogonal experiment
基金项目:
作者单位
徐珂 合肥工业大学 材料科学与工程学院 合肥 230009 
李萍 合肥工业大学 材料科学与工程学院 合肥 230009 
张超 合肥工业大学 材料科学与工程学院 合肥 230009 
薛克敏 合肥工业大学 材料科学与工程学院 合肥 230009 
摘要点击次数: 3531
全文下载次数: 2862
中文摘要:
      设计特征盒形件,使其包含双拉、拉-压、平面应变以及双线性应变路径,反映了覆盖件成形中常见的应变路径状态。通过正交试验方法,分析了工艺参数(压边力、摩擦系数、板厚)对其成形过程中特征区域应变路径影响的显著性,并得出了显著因素对应变路径的影响趋势。初步取得了控制DP600高强钢成形过程中特征区域应变路径的方法,为控制DP高强钢成形质量提供了有力的指导。
英文摘要:
      A special box-shaped part is designed. It will contain the corresponding strain paths such as double tension strain path, tension-compression strain path, plane strain path and double-linear strain path, thus reflecting the common strain path conditions during the sheet metal forming. With the help of orthogonal experiment, the significance of influence of forming parameters (blank holder force, friction coefficient, blank thickness) on strain path of specific areas in forming process is analyzed, and the influencing tendency of significant factors on strain path is achieved. The methods to control the strain paths in specific areas during the high-strength steel's(DP600) forming process are obtained preliminarily, which also serves as a powerful guidence to improve the forming performance of the high-strength steel.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12075143位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号