李道喜,李能文,明浩,等.改善挤出吹塑制件壁厚均匀性的几种方法[J].精密成形工程,2012,4(1):54-57.
LI Dao-xi,LI Neng-wen,MING Hao,et al.Several Methods of Improving the Homogenization of Extrusion Blow Molding Products Thickness[J].Journal of Netshape Forming Engineering,2012,4(1):54-57. |
| 改善挤出吹塑制件壁厚均匀性的几种方法 |
| Several Methods of Improving the Homogenization of Extrusion Blow Molding Products Thickness |
| 投稿时间：2011-09-21 修订日期：2012-01-10 |
| DOI： |
| 中文关键词: 挤出吹塑 异型口模 可调机头 三维中空吹塑 局部抽真空 型坯温差法 |
| 英文关键词: extrusion blow molding special-shaped die adjustable die three-dimensional hollow blow molding parison temperature difference method partial vacuum |
| 基金项目: |
|
| 摘要点击次数: 3592 |
| 全文下载次数: 3731 |
| 中文摘要: |
| 概述了近年来改善挤出吹塑中空制件壁厚不均匀的方法及其进展,包括新牌号的树脂，新的型胚壁厚控制技术及新的挤出吹塑成形工艺。型胚控制技术主要介绍了异型口模和可调机头；新成形工艺包括3D中空吹塑，真空吸塑与挤出吹塑相结合的技术，型坯温差法及高压低温挤出吹塑技术。 |
| 英文摘要: |
| Recent progressing methods of improving the wall thickness of extrusion blow molded parts, including new brands of resin, the new technology of controlling the thickness of parison and new extrusion blow molding technology were introduced. The mentioned parison thickness control technology contained special-shaped die and adjustable die. The listed new extrusion blow molding technology covered three-dimensional hollow blow molding, parison temperature difference method, combination of partial vacuum forming and blow molding, and high-pressure low-temperature extrusion blow molding technology. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号