王丽红,胡伟丽.中厚板深孔冲裁半精冲工艺[J].精密成形工程,2012,4(1):14-20.
WANG Li-hong,HU Wei-li.Half Fine Blanking Process in Deep Hole Punching on the Plate[J].Journal of Netshape Forming Engineering,2012,4(1):14-20. |
| 中厚板深孔冲裁半精冲工艺 |
| Half Fine Blanking Process in Deep Hole Punching on the Plate |
| 投稿时间：2011-10-17 修订日期：2012-01-10 |
| DOI： |
| 中文关键词: 深孔冲裁 半精冲 齿形压板 孔深比 |
| 英文关键词: punching in deep hole half fine blanking ring gear gag hole depth ratio |
| 基金项目: |
|
| 摘要点击次数: 3528 |
| 全文下载次数: 3129 |
| 中文摘要: |
| 以中、厚板的电器零件为例，分析了这类零件上深孔类小孔制造工艺的难点，介绍了如何在普通冲裁的基础上,釆用精冲的齿形压板，较小的冲裁间隙和精确的导向。成功地完成了对这类零件上的小孔实施半精冲工艺,并介绍了用于批量生产的模具结构的主要特点。 |
| 英文摘要: |
| The problems and difficulties to manufacture the deep holes on thick plate for electrical components were analysed. Based on the ordinary punching half fine blanking process of deep hole on this kind of component was completed successfully by use of ring gear gag, smaller blanking clearance and precise guidance, etc. The main features of the structure of the mass-production molds were introduced. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号