文章摘要
李春庄,牛福忙,张霞,等.宽凸缘深拉深成形工艺探讨[J].精密成形工程,2012,4(1):12-13.
LI Chun-zhuang,NIU Fu-mang,ZHANG Xia,et al.Study of Deep Drawing for a Part With Wide Flange[J].Journal of Netshape Forming Engineering,2012,4(1):12-13.
宽凸缘深拉深成形工艺探讨
Study of Deep Drawing for a Part With Wide Flange
投稿时间:2011-07-07  修订日期:2012-01-10
DOI:
中文关键词: 危险断面  宽凸缘  深拉深  浮动凸模
英文关键词: angerous section  wide flange  deep drawing  floating punch
基金项目:
作者单位
李春庄 淮海工业集团有限公司山西 长治 046012 
牛福忙 淮海工业集团有限公司山西 长治 046012 
张霞 淮海工业集团有限公司山西 长治 046012 
杨耀平 淮海工业集团有限公司山西 长治 046012 
摘要点击次数: 3499
全文下载次数: 3956
中文摘要:
      根据某零件宽凸缘深拉深成形工艺中存在的缺陷,对拉深过程中影响零件壁厚差的主要因素进行了分析,找出了缩小相对变形的依据。介绍了凸模浮动拉深成形工艺,综述了浮动凸模的设计要点、模具结构、工作原理及实际应用效果。
英文摘要:
      Based on flaws in the deep drawing for a part with wide flange the main factors influencing the thickness variation of a part in drawing are analysed, the basis to reduce relative forming is found. The drawing technology by floating punch is introduced, including design points of floating punch, die structure, working mechanism and effect of practical use.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081984位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号