程兆虎,钱怡君,于浩.颗粒增强Al/Si复合材料的制备工艺研究[J].精密成形工程,2012,4(1):9-11.
CHENG Zhao-hu,QIAN Yi-jun,YU Hao.Preparation Technology Research of Silicon Particle Reinforced Aluminum Matrix Composites[J].Journal of Netshape Forming Engineering,2012,4(1):9-11. |
| 颗粒增强Al/Si复合材料的制备工艺研究 |
| Preparation Technology Research of Silicon Particle Reinforced Aluminum Matrix Composites |
| 投稿时间：2011-03-25 修订日期：2012-01-10 |
| DOI： |
| 中文关键词: 复合材料 浸渗法 颗粒增强 |
| 英文关键词: composites impregnation method particle reinforced |
| 基金项目: |
|
| 摘要点击次数: 3394 |
| 全文下载次数: 2763 |
| 中文摘要: |
| 研究用浸渗法制备颗粒增强铝硅复合材料的工艺。采用加压渗流将铝液压入到硅颗粒间隙中制备复合材料，分析了不同粒度颗粒增强相对复合材料浸渗长度及Si含量的影响。结果表明：利用浸渗法制得的Al-Si复合材料硅的体积分数可高达60%以上，随颗粒度的减小而增加。 |
| 英文摘要: |
| The process of preparing silicon particle reinforced aluminum matrix composites by impregnation method was studied. Aluminum alloy was pressed in the clearance of Si particle by compressive infiltration to prepare composites. The effects of different particle sizes on the alumetizing length of precast block and the content of Si were analyzed. The result indicates that the content of silicon in composites can reach to 60% in the Al-Si composites by the impregnation method, and the content of Si is increased as the granularity decrease. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号