文章摘要
张敬文,鄂大辛,李延民,等.弯曲速度对弯管壁厚变化的影响[J].精密成形工程,2012,4(1):5-8,39.
ZHANG Jing-wen,E Da-xin,LI Yan-min,et al.Effects of Bending Velocity on the Change of Wall Thickness in Tube Bending[J].Journal of Netshape Forming Engineering,2012,4(1):5-8,39.
弯曲速度对弯管壁厚变化的影响
Effects of Bending Velocity on the Change of Wall Thickness in Tube Bending
投稿时间:2011-07-07  修订日期:2012-01-10
DOI:
中文关键词: 管材弯曲  弯曲速度  壁厚变化  起皱
英文关键词: tube bending  bending velocity  wall thickness variation  wrinkling
基金项目:
作者单位
张敬文 北京理工大学 材料学院, 北京 100081 
鄂大辛 北京理工大学 材料学院, 北京 100081 
李延民 首都航天机械公司, 北京 100076 
田鑫 首都航天机械公司, 北京 100076 
摘要点击次数: 3727
全文下载次数: 2961
中文摘要:
      采用不同弯曲速度对5A06和1Cr18NiTi管进行了旋转弯曲试验和有限元模拟。分析后指出,弯曲速度对弯曲内侧管壁变形影响较大,弯曲内侧切向应力、应变及管壁增厚率均随弯曲速度增大而增大。同时,内侧管壁增厚对弯曲速度的敏感性具有随原始壁厚的增大而减小的变化趋势。薄壁管在过大弯曲速度下成形时,内侧因材料流动受阻滞易发生失稳起皱。
英文摘要:
      ube bending tests for 5A06 and 1Cr18NiTi tubes in different bending velocities under rotary draw bending were performed, combined with finite element analysis. It was revealed that bending velocity exerts great effects on deformation at the intrados of tube wall. Tangential stress-strain and wall thickness thickening rate in the inner side of the bend increase as bending velocity increases. Meanwhile, the sensibility of wall thickness thickening to bending velocity reduces with the accretion of initial wall thickness. Therefore, wrinkling and buckling may occur for material flow limit in the inner side of tube when thinwalled tubes are bent in excessively large bending velocity.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12069242位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号