田福祥.撑板锁紧两半凹模闭式挤压模具设计[J].精密成形工程,2011,3(3):78-81.
TIAN Fu-xiang.Design of Closed Extrusion Die with Halving Concave Die Locked by Support-boards[J].Journal of Netshape Forming Engineering,2011,3(3):78-81. |
| 撑板锁紧两半凹模闭式挤压模具设计 |
| Design of Closed Extrusion Die with Halving Concave Die Locked by Support-boards |
| 投稿时间：2010-12-27 修订日期：2011-05-10 |
| DOI： |
| 中文关键词: 闭式挤压 两半凹模 T形锻件 无飞边模锻 |
| 英文关键词: closed extrusion halving concave die T shape forgings die forging without any flash |
| 基金项目: |
|
| 摘要点击次数: 3432 |
| 全文下载次数: 2849 |
| 中文摘要: |
| T形锻件因形状所致，采用传统的整体凹模结构不能实现无飞边模锻。给出了不考虑摩擦的情况下T形锻件闭式挤压模具结构和依靠4个铰支撑板锁紧的纵向对合凹模结构的受力分析。锻件在两半凹模和冲头形成的封闭模腔中挤压成形，生产的锻件无飞边。 |
| 英文摘要: |
| The conventional structure of a solid concave die was not applicable for die forging of forgings without any flash，because of the T shape of forgings. A structure of closed extrusion die for T shape forgings and the analysis of forces were presented. The vertical halving concave die was locked by four gemel support-boards. The forging within a closed cavity was formed by a punch and two concave dies. The forgings without flash can be produced with the new type of forging die. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号