王宾,秦建平,王福利,等.不锈钢管冷旋压成形试验[J].精密成形工程,2011,3(3):5-9.
WANG Bin,QIN Jian-ping,WANG Fu-li,et al.The Research of Cold Spinning Forming of Stainless Steel Pipes[J].Journal of Netshape Forming Engineering,2011,3(3):5-9. |
| 不锈钢管冷旋压成形试验 |
| The Research of Cold Spinning Forming of Stainless Steel Pipes |
| 投稿时间：2010-12-24 修订日期：2011-05-10 |
| DOI： |
| 中文关键词: 工艺参数 奥氏体不锈钢管 冷旋压 |
| 英文关键词: technological parameter austenitic stainless steel pipe cold spinning |
| 基金项目:太原市大学生创新创业专项（100115156） |
|
| 摘要点击次数: 3596 |
| 全文下载次数: 2889 |
| 中文摘要: |
| 介绍了3种奥氏体不锈钢材料的特性，主要旋压工艺参数对旋压成形的影响。在不同工艺参数下，采用三旋轮错距、无中间退火、直接强力冷旋压工艺，对3种奥氏体不锈钢管材料进行反旋压成形，分析了不同参数下奥氏体不锈钢管旋压成形的特点，提出了针对3种奥氏体不锈钢管冷旋压的合理工艺参数。 |
| 英文摘要: |
| The paper presents material properties of three austenitic stainless steel and influences of main spinning technological parameters on spinning forming. Three kinds of austenitic stainless steel pipe were backward spinned with spinning process of three wheels stagger, without intermediate annealing, direct cold spinning in different technological parameters. It analyses characters of spinning forming of austenitic stainless steel pipe in different technological parameters, it puts forwards reasonable technological parameters to cold spinning of three kinds of austenitic stainless steel pipe. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号