文章摘要
王立志.凸包U型零件成形工艺及模具设计[J].精密成形工程,2010,2(5):75-77.
WANG Li-zhi.Design of Forming Technology and Die for U Type Part with Convex Hull[J].Journal of Netshape Forming Engineering,2010,2(5):75-77.
凸包U型零件成形工艺及模具设计
Design of Forming Technology and Die for U Type Part with Convex Hull
投稿时间:2010-05-28  修订日期:2010-09-10
DOI:
中文关键词: 薄板  凸包  成形  工艺  模具
英文关键词: sheet  convex hull  forming  process  mould
基金项目:
作者单位
王立志 中航工业西安航空计算技术研究所 西安 710068 
摘要点击次数: 3393
全文下载次数: 3362
中文摘要:
      通过对凸包U型零件结构特征、生产条件及传统工艺的分析,指出了传统工艺流程在加工该类零件时的不足,并根据当前生产条件确定了凸包U型零件的成形方法及设计了具有显著特点的凸包成形模具。按照确定的工艺及模具工作流程进行生产,最终保证了零件成形质量,提高了生产效率。
英文摘要:
      Based on the analysis of structure characteristics of U type part with convex hull, production condition and the traditional process, the defects of traditional process in processing such parts are pointed out. The forming method for U type part with convex hull is fixed on according to the current production conditions and the forming mould with prominent features for convex hull is designed. According to certain technology and die working process, the forming quality is guaranteed eventually, the production efficiency is improved.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12076033位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号