文章摘要
王长林,陈俊之,赵志翔,等.深锥形壳体温挤压成形工艺与模具[J].精密成形工程,2010,2(5):57-60.
WANG Chang-lin,CHEN Jun-zhi,ZHAO Zhi-xiang,et al.Warm Extrusion Technology and Die of Deep Tapered Shell[J].Journal of Netshape Forming Engineering,2010,2(5):57-60.
深锥形壳体温挤压成形工艺与模具
Warm Extrusion Technology and Die of Deep Tapered Shell
投稿时间:2010-08-05  修订日期:2010-09-10
DOI:
中文关键词: 铝合金  深锥形壳体  温挤压成形  有限元  工艺参数  数值模拟  模具设计
英文关键词: aluminium alloy  deep tapered shell  warm extrusion  finite element  technology parameter  numerical simulation  die design
基金项目:
作者单位
王长林 西安东方集团有限公司 西安 710043 
陈俊之 西安东方集团有限公司 西安 710043 
赵志翔 中国兵器工业第五九研究所 重庆 400039 
万宝文 西安东方集团有限公司 西安 710043 
刘汉雄 西安东方集团有限公司 西安 710043 
摘要点击次数: 3356
全文下载次数: 2857
中文摘要:
      针对某铝合金深锥形壳体的温挤压成形过程,用有限元数值模拟软件进行了模拟,分析了成形工艺及模具设计。提出了消除产品壁厚差较大、孔口高低不平现象的措施。
英文摘要:
      Warm extrusion was simulated by finite element software for an aluminium alloy deep tapered shell. The forming technology and die design were analysed. Measures were put forward to the problems of larger wall thickness difference and ragged orifice.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12074692位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号