文章摘要
张倩倩,薛克敏,李晓,等.基于APDL的机架结构无偏载有限元分析[J].精密成形工程,2010,2(5):31-34.
ZHANG Qian-qian,XUE Ke-min,LI Xiao,et al.Finite Element Analysis for Multicored Forging Hydraulic Press Frame Structure based on APDL[J].Journal of Netshape Forming Engineering,2010,2(5):31-34.
基于APDL的机架结构无偏载有限元分析
Finite Element Analysis for Multicored Forging Hydraulic Press Frame Structure based on APDL
投稿时间:2010-04-13  修订日期:2010-09-10
DOI:
中文关键词: 模锻  液压机  有限元分析  参数化
英文关键词: die forging  hydraulic press  finite element analysis  parameterization
基金项目:
作者单位
张倩倩 合肥工业大学 材料科学与工程学院 合肥 230009 
薛克敏 合肥工业大学 材料科学与工程学院 合肥 230009 
李晓 合肥工业大学 材料科学与工程学院 合肥 230009 
侯一江 合肥锻压机床有限公司 合肥 230601 
摘要点击次数: 3531
全文下载次数: 2768
中文摘要:
      在研究6 300 kN多向模锻液压机结构特点的基础上,利用有限元模拟软件ANSYS中的参数化语言APDL对机架进行三维建模,对机架结构进行强度和刚度分析,从而获得机架的等效应力和等效位移的分布规律。
英文摘要:
      On the basis of studying the structural characteristics of the 6 300 kN multicored forging hydraulic press,the 3D-FEM parameterized model of the frame is established by using the ANSYS Parametric Design Language (APDL),and structural analysis is carried out.The stress and displacement distribution of the frame under static load are disclosured.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12079227位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号