王宾,秦建平,王晓璐.阶梯环向筋筒形件轧制成形工艺研究[J].精密成形工程,2010,2(5):27-30.
WANG Bin,QIN Jian-ping,WANG Xiao-lu.The Research of Roll Forming Process of Cylindrical Part with Stepped Ring-stiffeners[J].Journal of Netshape Forming Engineering,2010,2(5):27-30. |
| 阶梯环向筋筒形件轧制成形工艺研究 |
| The Research of Roll Forming Process of Cylindrical Part with Stepped Ring-stiffeners |
| 投稿时间：2010-06-08 修订日期：2010-09-10 |
| DOI： |
| 中文关键词: 环向筋 筒形件 径向轧制 |
| 英文关键词: ring-stiffener cylindrical part radial rolling |
| 基金项目: |
|
| 摘要点击次数: 3274 |
| 全文下载次数: 2785 |
| 中文摘要: |
| 介绍了现有筒形件加工工艺，分析了筒形件不同加工工艺的特点。根据大长径比、阶梯环向筋筒形件的特点，给出了径向轧制成形工艺方案，轧制的咬入条件，并进行了变形分析，分析了该工艺的优点和存在的问题。 |
| 英文摘要: |
| Processes of cylindrical part are introduced and the characteristics of different processes are analyzed in the paper. It presents the process scheme of radial rolling, bite condition of rolling and deformation analysis according to the characteristics of the cylindrical part with large aspect ratio and stepped ring-stiffeners. The advantages of the process and the problems which need to be resolved are analyzed. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号