伍世棋.电饭煲盖板的注塑模设计[J].精密成形工程,2010,2(4):80-82,88.
WU Shi-qi.Design of the Injection Mould for Electric Cooker Shell[J].Journal of Netshape Forming Engineering,2010,2(4):80-82,88. |
| 电饭煲盖板的注塑模设计 |
| Design of the Injection Mould for Electric Cooker Shell |
| 投稿时间：2010-04-02 修订日期：2010-07-10 |
| DOI： |
| 中文关键词: 注塑模 电饭煲 盖板 工艺分析 |
| 英文关键词: injection mould electric cooker shell process analysis |
| 基金项目: |
|
| 摘要点击次数: 3346 |
| 全文下载次数: 3050 |
| 中文摘要: |
| 以大尺寸、多倒扣、多筋位、多孔结构的电饭煲盖板为例，详细地分析了复杂家电产品外形的结构设计特点。在此基础上对电饭煲盖板的模具成形工艺性进行了针对性的分析，全面地论述了电饭煲盖板注塑模设计的考虑因素，着重介绍了型腔和型芯、二次分型结构、倒扣的内侧滑块抽芯机构的设计等。 |
| 英文摘要: |
| The structure characteristic of the complex electric appliance products with multi-undercuts, multi-ribs and multi-holes was analyzed by the electric cooker shell as an example. Based on the analysis the forming process with die was analysed. The factors on the injection mould design for the electric cooker shell were discussed in detail, especially the method for designing the core and cavity, second parting system, the side parting and core pulling system. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号