文章摘要
王鑫.连接片多工位级进模具设计[J].精密成形工程,2010,2(4):64-66.
WANG Xin.Design of Multi-position Progressive Die for Connecting Piece[J].Journal of Netshape Forming Engineering,2010,2(4):64-66.
连接片多工位级进模具设计
Design of Multi-position Progressive Die for Connecting Piece
投稿时间:2010-02-24  修订日期:2010-07-10
DOI:
中文关键词: 连接片  冲压  排样设计  模具设计
英文关键词: connecting piece  stamping  layout design  die design
基金项目:
作者单位
王鑫 南京工程学院 材料工程学院 南京 211167 
摘要点击次数: 3237
全文下载次数: 2726
中文摘要:
      分析了连接片的冲压工艺性,设计了多工位级进冲压成形方案,详细阐述了单排排样设计方案,还介绍了连接片多工位级进模的总体结构及特点。实践证明:该模具结构合理,加工质量好,生产效率高,对此类零件的级进模设计有重要参考价值。
英文摘要:
      The stamping technique of a connecting piece was analyzed, and a multi-position progressive stamping scheme was determined. The process of layout design arranged in single row was stated in detail and the total structure and characteristic of multi-position progressive die for connecting piece were introduced. By practice it is proved that the die structure is reasonable, the processing quality is good and the productivity is high, which has an important reference value for designing the progressive die of this kind of part.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12079082位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号