文章摘要
孟令先,张志宏,刘百宣,等.链轮的体积成形工艺与模具[J].精密成形工程,2010,2(4):57-59,75.
MENG Ling-xian,ZHANG Zhi-hong,LIU Bai-xuan,et al.The Technology and Die of the Solid Forming of Chain Wheel[J].Journal of Netshape Forming Engineering,2010,2(4):57-59,75.
链轮的体积成形工艺与模具
The Technology and Die of the Solid Forming of Chain Wheel
投稿时间:2010-05-18  修订日期:2010-07-10
DOI:
中文关键词: 链轮  体积成形  模具
英文关键词: chain wheel  solid forming  die
基金项目:
作者单位
孟令先 郑州机械研究所 郑州 450052 
张志宏 郑州机械研究所 郑州 450052 
刘百宣 郑州机械研究所 郑州 450052 
刘忠明 郑州机械研究所 郑州 450052 
张立勇 郑州机械研究所 郑州 450052 
张和平 郑州机械研究所 郑州 450052 
张元国 郑州机械研究所 郑州 450052 
摘要点击次数: 3281
全文下载次数: 2769
中文摘要:
      研究的链轮内为渐开线小模数齿轮,外为变位齿轮,齿短而尖,内外齿同心度要求高,原切屑加工生产效率低且同心度不易保证。通过分析、研究,采用体积成形工艺技术将内外齿一次精密成形,并且一次可以成形多件链轮。设计、制做的成形模具结构简单、新颖,使用方便,寿命高。
英文摘要:
      In the project, inside form of the chain wheel is intenal gear and it′s outside form is external gear. Internal gear is a small model involute gear, external gear is a modified gear with short and peaked tooth. The demand of coaxiality for intenal and extenal gear is high. The technology of solid forming of the chain wheel is introduced. A set of high accuracy die with simple novel structure and long service life is designed and manufactured. The internal and external gear tooth is formed at one time. In the same time, the multi part is formed. The solid forming technology is profitable reference for producting the same type of the chain wheel.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12080684位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号