文章摘要
吴石林,张玘,黄芝平.Spherical-cymbal换能器端帽自由胀形回弹预测与控制[J].精密成形工程,2010,2(4):18-22.
WU Shi-lin,ZHANG Qi,HUANG Zhi-ping.Forecast and Control of the Spring-back of Spherical-cymbal Transducer's End-caps in Free-bulging[J].Journal of Netshape Forming Engineering,2010,2(4):18-22.
Spherical-cymbal换能器端帽自由胀形回弹预测与控制
Forecast and Control of the Spring-back of Spherical-cymbal Transducer's End-caps in Free-bulging
投稿时间:2010-05-15  修订日期:2010-07-10
DOI:
中文关键词: Spherical-cymbal换能器  端帽  自由胀形  回弹  数值模拟
英文关键词: spherical-cymbal transducer  end-cap  free-bulging  spring-back  numerical simulation
基金项目:
作者单位
吴石林 国防科学技术大学 仪器科学与技术系 长沙 410073 
张玘 国防科学技术大学 仪器科学与技术系 长沙 410073 
黄芝平 国防科学技术大学 仪器科学与技术系 长沙 410073 
摘要点击次数: 3291
全文下载次数: 2715
中文摘要:
      为更经济地制造出质量更高的Spherical-cymbal换能器端帽,在其成形中用自由液压胀形工艺取代传统的冲压工艺,并对其自由胀形中的回弹问题进行了重点研究。采用ANSYS/LS-DYNA软件对端帽的自由胀形回弹量进行了预测,并根据约束条件及有限元模拟结果提出了回弹控制措施。实验结果验证了采用有限元数值模拟进行Spherical-cymbal换能器端帽自由胀形回弹预测与控制的可行性。
英文摘要:
      In order to manufacture spherical-cymbal transducer's end-caps with higher quality and lower costs, free hydro-bulging technology is used to substitute the traditional stamping technology, and the emphases are laid on the study of the spring-back of end-caps in free hydro-bulging. ANSYS/LS-DYNA software is adopted to forecast the spring-back of end-caps in free hydro-bulging. The controlling method is brought forward based on restrictions and the FEM simulation results. Experiment results prove that it's feasible to forecast and control the spring-back of end-caps by FEM numerical simulation.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081958位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号