文章摘要
李达,章凯,李萍.铝粉烧结锥形件压扭成形模拟及实验研究[J].精密成形工程,2010,2(4):15-17.
LI Da,ZHANG Kai,LI Ping.Simulation and Experimental Study in HPT Process of Sintered Aluminum Cone[J].Journal of Netshape Forming Engineering,2010,2(4):15-17.
铝粉烧结锥形件压扭成形模拟及实验研究
Simulation and Experimental Study in HPT Process of Sintered Aluminum Cone
投稿时间:2010-05-17  修订日期:2010-07-10
DOI:
中文关键词: 铝粉  锥形件  高压扭转  数值模拟  实验
英文关键词: aluminium powder  cone  high-pressure torsion  numerical simulation  experiment
基金项目:合肥工业大学2009年度大学生创新性实验计划项目(2009CXSY081)
作者单位
李达 合肥工业大学 材料科学与工程学院安徽 合肥 230009 
章凯 合肥工业大学 材料科学与工程学院安徽 合肥 230009 
李萍 合肥工业大学 材料科学与工程学院安徽 合肥 230009 
摘要点击次数: 3269
全文下载次数: 2789
中文摘要:
      以铝粉烧结锥形件为研究对象,应用DEFORM软件对其压扭成形过程进行了三维有限元模拟,获得了成形过程中相对密度、等效应变、速度场的分布规律,并在模拟的基础上进行了相关实验研究。结果表明压扭工艺可以成形出近乎致密的铝粉锥形件。
英文摘要:
      The FEM simulation in HPT process of sintered aluminum cone was studied with DEFORM, and the distribution of relative density and strain-effective and velocity was obtained. Based on the simulation some related experiment research was conducted. The results show that the nearly compact aluminum cones can be producted by the high-pressure torsion.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第12081374位访问者    渝ICP备15012534号-6

>版权所有:《精密成形工程》编辑部 2014 All Rights Reserved

>邮编:400039 电话:023-68679125传真:02368792396 Email: jmcxgc@163.com

>    

渝公网安备 50010702501719号