武京伟,蔡玉强.冷轧轧制力数学模型的研究[J].精密成形工程,2010,2(4):12-14,26.
WU Jing-wei,CAI Yu-qiang.Study of Mathematic Model of Cold Rolling Force[J].Journal of Netshape Forming Engineering,2010,2(4):12-14,26. |
| 冷轧轧制力数学模型的研究 |
| Study of Mathematic Model of Cold Rolling Force |
| 投稿时间：2010-05-18 修订日期：2010-07-10 |
| DOI： |
| 中文关键词: 冷轧 轧辊弹性压扁 轧制力 数学模型 |
| 英文关键词: cold rolling roll elastic flatness roll force mathematic model |
| 基金项目: |
|
| 摘要点击次数: 3499 |
| 全文下载次数: 3096 |
| 中文摘要: |
| 通过对冷轧四辊轧机的实验分析，获得了轧制过程中的实际接触弧长。以卡尔曼单位压力微分方程与采利柯夫解为基础，并考虑轧辊弹性压扁，将实际接触区划分成不同的区域，根据不同区域的边界条件，建立了更准确的单位轧制压力的数学模型。 |
| 英文摘要: |
| Through the experimental analysis on the cold four-high mill the contact arc length in the strip cold rolling process is obtained. Based on the Karman differential equation and the answer of A.и.целов, and taking into account of the roll elastic flatness, the more accurate mathematic model of rolling force in different regions is set up according to the boundary conditions of different regions. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501719号